Parts for your 2019 Haval H6-Pedal pads

2019 Haval H6 pedal-pads: what they do and how to look after them

Based on Haval’s 2017–2020 H6 factory parts catalogues and workshop procedures, as well as common OEM design practice and Australian/New Zealand safety expectations for non-slip pedal surfaces, the 2019 Haval H6 is fitted with replaceable rubber pedal pads on the brake pedal (and on the clutch pedal in manual variants). The accelerator pedal uses an integrated textured plastic/metal surface rather than a separate rubber pad, so it’s not a replaceable “pad” item.

On the H6, pedal-pads are there for grip, comfort and consistency. The rubber compound cushions the foot, sheds water and mud, and keeps shoes from sliding off under hard braking. Over time, the pad wears smooth, hardens, cracks or peels at the edges, which can reduce grip—especially in wet weather or when hopping in with sandy boots after a day at the beach.

As part of routine servicing, it’s smart to inspect the brake (and clutch, if fitted) pedal pads. Look for glazing, shiny smooth spots, hardened rubber, splits, missing chunks, or a pad that has started to walk off the metal pedal plate. If any of that shows up, replace the pad. Many owners find three to five years is a practical window, but high‑km commuters or tradies might need them sooner.

Replacement is quick and typically tool-free:

• Wash the old pad with mild detergent to remove grit, then peel it off from a corner.
• Wipe the metal pedal plate clean and dry—use isopropyl alcohol if it’s greasy.
• Warm the new pad slightly (sunlight or warm water) to make it flexible, then hook the lower lip first and roll it over the pedal until the upper lip snaps into place.

Go for genuine or quality aftermarket pads that match the H6 pedal shape, a sloppy fit can work loose. Avoid silicone dressings or tyre shine on the pads—they can make them slippery. If the accelerator surface is worn, it’s usually an integrated pedal assembly issue rather than a rubber pad swap.

Quick checks every service, and a replacement the moment grip drops off, keep braking feel consistent and confidence high—exactly what owners want from their 2019 Haval H6.

Popular questions about 2019 Haval H6 pedal-pads

Does the 2019 Haval H6 have pedal-pads on all pedals?
Automatic models have a replaceable rubber pad on the brake pedal. Manual models add a clutch pedal pad. The accelerator uses an integrated textured surface, not a separate rubber pad.

How often should the brake pedal pad be replaced?
There’s no strict kilometre limit. Replace when it’s smooth, hardened, cracked, or starting to slip on the pedal plate. For many drivers that’s roughly every 3–5 years, but heavy use or gritty conditions can shorten that.

Can owners replace the pedal pad at home?
Yes. It’s a straightforward job—clean, peel off, and clip on the new pad—usually done in a few minutes. Just ensure the new pad is seated all the way around the pedal for a tight, safe fit.