Parts for your 2019 Bmw X3-Gas struts

2019 BMW X3 gas-struts

Gas-struts are absolutely relevant to the 2019 BMW X3 (G01). BMW’s official parts catalogue (ETK/RealOEM) lists gas springs for both the bonnet and the tailgate on G01 models, and BMW TIS repair procedures cover removal and installation of the gas-filled struts for the engine hood and the tailgate. Major OE suppliers’ catalogues (such as Stabilus and SUSPA) also publish direct-fit gas struts for the 2019 X3, including variants for vehicles with the automatic tailgate. So yes—this X3 uses gas struts as standard equipment.

On this model, the gas struts do the heavy lifting—literally. They counterbalance the weight of the bonnet and the tailgate, making them easy to open and keeping them steady once raised. Even X3s with a powered tailgate still rely on at least one gas spring to assist the electric drive and to damp movement so it opens and closes smoothly. When they age, the nitrogen charge and internal seals can fade, which shows up as a bonnet that won’t stay up unaided or a tailgate that lifts slowly, sags in the cold, or shudders on the way up.

As part of routine servicing on a 2019 BMW X3, it’s smart to assess the gas struts. A quick check takes seconds and can prevent a nasty surprise to the back of the head.

• Look for oily film on the strut body, bent shafts, or rusty mounts.
• Open the bonnet and tailgate fully and see if they hold their height without drifting down.
• Pay attention to slow or uneven lift, especially in cooler weather.

Replacement is straightforward but should be done safely. Always support the panel—use a prop or have a mate hold it—then pop the circlips, swap the struts, and ensure the ball studs and clips are correctly seated. Replace them in pairs on the same opening so lift is balanced. For powered tailgates, follow the correct initialisation procedure after refitting, often this is just manually setting the open height and storing it, though some variants may require a scan-tool reset if a drive unit was disturbed. There’s no regular “service” needed beyond keeping the shafts clean—don’t lubricate them, as oils can attack the seals. Quality OE-equivalent units typically last 5–10 years depending on climate and use, so if the X3 is starting to sag, fresh gas struts will bring back that easy, one-finger lift and rock-solid hold.

Popular questions about 2019 BMW X3 gas-struts

Do all 2019 BMW X3s have gas struts on both the bonnet and the tailgate?
Yes. The bonnet uses gas struts to hold it open, and the tailgate uses gas assistance whether it’s a manual or a power-operated tailgate. On power tailgates, a gas spring works alongside the electric drive to balance weight and smooth the motion.

How long do the X3’s gas struts last, and when should they be replaced?
Most last 5–10 years. Replace them when the bonnet or tailgate won’t stay up, opens sluggishly, drops in cold weather, or shows oil mist on the strut body. It’s best practice to replace in pairs on the same opening for even lift.

Can the gas struts be replaced at home?
Yes, with basic tools and care. Support the panel, remove the retaining clips, swap the struts, and ensure clips are fully seated. For powered tailgates, re-teach the open height after installation, no coding is needed for gas springs alone.