Parts for your 2019 Audi Q5-Coil springs

2019 Audi Q5 coil springs — what they do and when to replace them

Technical references including the Audi Q5 (FY) Workshop Manual (ElsaWin), the 2019 Q5 Owner’s Manual, Audi ETKA electronic parts catalogue, and the MY19 Audi Australia product guide specify the Q5’s five‑link front and rear suspension with steel coil springs as standard (adaptive damping available on some trims). That means coil springs are relevant and fitted to the 2019 Audi Q5 sold in Australia and New Zealand.

On the 2019 Audi Q5, the coil springs carry the vehicle’s weight and set its ride height, working with the dampers to smooth out bumps and corrugations. They keep the tyres planted so the quattro and safety systems can do their job. Audi tunes the Q5’s five‑link layout around those steel coils for a balanced, confident feel in town and on the open road.

Coil springs aren’t a scheduled replacement item, but they do wear. At regular services (every 12 months or 15,000 km, whichever comes first), they should be inspected for chipped coating, rust, cracked ends, sagging, and noisy or perished rubber seats. If the vehicle leans, sits low, rides harsh, or clunks over speed humps, the springs deserve a closer look.

• Replace springs in axle pairs to maintain even ride height and handling.
• Match the exact OE spec for the vehicle’s suspension code (standard or sport) and load rating.
• Renew related parts as needed: top mounts, bearings, bump stops and spring seats.
• Torque fasteners at normal ride height to avoid bush preload and squeaks.
• Finish with a four‑wheel alignment, height changes will shift camber and toe.

There’s no fixed lifespan, but many Q5s see 8–12 years of service from their coils, depending on roads and loads. If the Q5 has racked up 100,000+ kilometres and needs springs, it’s smart to assess the dampers at the same time, especially if rebound feels floaty.

Coil springs are under serious tension, so a proper compressor and know‑how are essential. A qualified technician should handle removal and refit. For Q5s with optional adaptive dampers, the springs are still steel coils, only the damper valving changes. After fresh coils, drivers can expect quieter suspension, surer braking, flatter cornering and more even tyre wear.

Popular questions

How often should coil springs be replaced on a 2019 Audi Q5?
There’s no set interval. Replace them if they’re cracked, sagging, corroded, or causing noise or poor ride. Have them checked at each service, harsh roads, towing and heavy loads accelerate wear.

Do you need a wheel alignment after fitting new coil springs?
Yes. Ride height affects camber and toe, so a four‑wheel alignment after spring replacement is essential to protect tyres and restore proper handling.

Does the 2019 Q5 use air suspension instead of coil springs?
Most 2019 Q5 models in Australia and New Zealand run steel coil springs (with optional adaptive dampers on some grades). The SQ5 also uses coils. If a vehicle had air springs, it would have an air compressor and lines—rare on this model year here.