Parts for your 2018 Volvo Xc60-Wheel hubs

2018 Volvo XC60 wheel-hubs: what they do and how to look after them

Yes, wheel-hubs are absolutely used on the 2018 Volvo XC60. Technical references such as Volvo VIDA (the factory Service, Diagnostics & Repair information for SPA-platform models) and the Volvo Genuine Parts catalogue list bolt-on hub and bearing assemblies at all four corners of the 2018 XC60. These units integrate the wheel bearing and the encoder for the ABS/ESC wheel-speed signal, and fasten to the steering knuckle (front) and rear axle carrier (rear). Aftermarket catalogues from bearing manufacturers also list complete hub units specifically for the 2018 XC60, confirming their fitment and design.

On this XC60, the hub assembly’s job is to support the wheel and brake rotor, keep the rolling movement silky smooth, and feed accurate wheel-speed data to safety systems like ABS and stability control. Because the bearing is sealed, it’s maintenance-light: there’s no greasing or adjustment—when it wears, you replace the whole hub assembly.

As part of routine servicing, it’s smart to check for early signs of hub wear. Spin each wheel with the car lifted and listen for a low growl or rumble that changes with speed. Gently rock the wheel at 12 and 6 o’clock