Your Selected Vehicle
Parts for your 2018 Toyota Wish-Coolant
Nulon Pro-Strength Extreme Cooling System Flush & Degreaser 500ml - PSCSF
Fitment Notes:
Explore 4WD & Adventure
Castrol Radicool P-OAT Purple Coolant Premix 5L - 3431624
Fitment Notes:
Castrol Radicool P-OAT Purple Coolant Concentrate 5L - 3429906
Fitment Notes:
Coolant Maintenance for the 2018 Toyota Wish
The 2018 Toyota Wish is a reliable vehicle, but like all cars, it requires regular maintenance to keep it running smoothly. One crucial part of your Toyota Wish's maintenance routine involves taking care of the coolant system. Coolant, often known as antifreeze, plays a vital role in your vehicle's overall health. It helps manage the engine's temperature, ensuring it doesn't overheat or freeze in various weather conditions. This section provides essential advice on coolant maintenance and replacement as part of your vehicle servicing.
It's recommended to check your coolant level every few months or whenever you notice anything unusual about your vehicle's performance. The coolant reservoir is typically located under the bonnet, and you can usually spot it by its distinct markings for 'Full' and 'Low'. When inspecting the coolant, make sure that the engine is cold to avoid any burns or injuries. The coolant should be within the recommended levels, and its colour should be bright and clear, often exhibiting a pink, green, or orange hue depending on the type. If the coolant appears dirty or discoloured, this might be a sign that it's time for a flush and replacement.
Replacing your coolant involves a process often called a coolant flush. Here's a straightforward guide to help you with this task:
- Ensure your vehicle is on a flat surface and the engine is cool before starting.
- Locate the coolant drain plug beneath the radiator and place a container underneath to capture the old coolant. Be aware of any environmental regulations regarding the disposal of old coolant.
- Open the drain plug and allow the old coolant to fully drain out. This may take a few minutes.
- Replace the drain plug and fill with the appropriate type and mixture of coolant (often a 50:50 mix with water), which should meet Toyota's specifications.
- Run the engine with the heater on max for a few minutes to allow the new coolant to circulate through the system, then check the levels again and top up if necessary.
- Dispose of the old coolant responsibly, as it can be harmful to the environment.
Proper maintenance of your vehicle's coolant will not only help avoid engine problems but also ensure that your vehicle runs efficiently. Regular coolant checks and timely replacements are part of good vehicle care habits. Remember, if you're unsure about DIY procedures or the right coolant type for your Toyota Wish, it's always a good idea to consult with a professional mechanic. They can provide the expert care your vehicle deserves, ensuring you can enjoy smooth and worry-free drives.