Skip to content Skip to navigation menu

Your Selected Vehicle

Brands

Show More Show Less

Price

Parts for your 2018 Subaru Exiga-Batteries

Sort by
NOCO Boost 12V 1000A Jump Starter - GB40
10%OFF

NOCO Boost 12V 1000A Jump Starter - GB40

$189
$210
Fitment Notes:
See More

Explore 4WD & Adventure

NOCO Boost 12V 1500A Jump Starter - GB50

NOCO Boost 12V 1500A Jump Starter - GB50

$311
$248
Member Price
Fitment Notes:
See More
Projecta 12V 1400A Jump Starter - IS1400
25%OFF

Projecta 12V 1400A Jump Starter - IS1400

$299
$429
Fitment Notes:
See More
Mechpro 18V 4Ah Lithium Battery

Mechpro 18V 4Ah Lithium Battery

$89
Fitment Notes:
See More
MaxiTrac Digital Tyre Deflator
30%OFF

MaxiTrac Digital Tyre Deflator

$42.70
$61
Fitment Notes:
See More
Mechpro 18V Battery Charger (240 Volt)

Mechpro 18V Battery Charger (240 Volt)

$39
Fitment Notes:
See More
Showing 1 - 39 of 5978 products

Understanding and Maintaining the Battery in Your 2018 Subaru Exiga

The 2018 Subaru Exiga comes equipped with a standard vehicle battery, an essential component that most people take for granted until it causes trouble. Contrary to some newer electric or hybrid models that rely heavily on alternative power sources, the Exiga utilises a conventional 12-volt lead-acid battery to keep the vehicle's electrical systems running smoothly. This includes starting the engine, powering the lights, radio, and other electronic gadgets, as well as providing the electricity needed for your daily drives.

Batteries play a crucial role in any car, including the 2018 Subaru Exiga. Their primary job is to deliver that initial burst of energy required to crank the engine over when you turn the key or push the start button. Without a healthy battery, the engine won't start, and all the electrical components will be offline. Once the engine is running, the vehicle's alternator takes over, generating electricity and keeping the battery charged.

Apart from starting the vehicle, the battery also stabilises voltage within the electrical system, ensuring that power fluctuations do not damage sensitive electronics. This is particularly important in modern cars like the Exiga, which rely on a multitude of sensors and control modules.

When it comes to battery replacement and maintenance for the 2018 Subaru Exiga, there are a few essentials worth keeping in mind to avoid being stranded and to keep your vehicle's systems functioning as they should.

  • Regular Inspection and Cleaning: Check the battery terminals for corrosion or build-up. It's quite common for green or white residue to form, which can hinder electrical contact. Cleaning the terminals with a mixture of baking soda and water and then applying a protective layer of petroleum jelly can help maintain good connectivity.
  • Check Battery Health: Many car servicing centres can perform battery tests that evaluate the capacity and state of charge. This is especially handy before a road trip or if your vehicle's electrical components start acting up. A good battery tester can simulate starting loads to give a clear picture of whether your battery can still perform under pressure.
  • Keep the Battery Secure: Batteries in the Exiga need to be tightly fastened to prevent vibrations and movement while driving. A loose battery can cause damage and premature failure.
  • Replace When Necessary: On average, a car battery lasts around three to five years, depending on climate, driving habits, and maintenance. If the battery is older than this or if tests show it's struggling to hold charge, it's time for a replacement to avoid unexpected breakdowns.
  • Avoid Draining the Battery: Try not to leave lights, infotainment systems, or other electronics running when the engine isn't on. Prolonged battery drain can lead to a dead battery that requires jump-starting or replacement.

Subaru Exiga owners in Australia should also be mindful of the local climate. Hot and humid conditions can speed up battery degradation, so occasionally checking the battery and its health status becomes even more important. Conversely, if the vehicle is stored for extended periods, such as in winter or during holidays, disconnecting the battery or using a trickle charger can help maintain battery life.

When the time comes to replace the battery on a 2018 Subaru Exiga, it's essential to choose a replacement that meets or exceeds the manufacturer's specifications. The rating is usually measured in cold cranking amps (CCA), which indicates the battery's ability to start the engine under cold conditions - important for reliability. Picking a battery with the correct dimensions and terminal configuration is also critical to ensure it fits correctly and connects properly.

Installing a new battery is relatively straightforward, though many prefer to entrust this to a professional to avoid any mishaps with the vehicle's electronic systems. After installation, it's a good idea to reset clocks, radio presets, and any vehicle settings that may have been disrupted.

By staying on top of battery maintenance for the 2018 Subaru Exiga, owners can enjoy smoother starts, reliable electronic functions, and worry-free driving. Whether it's a quick visual inspection or a full battery health test, giving some attention to this humble but vital component is a small effort that pays off big time on the road.