Parts for your 2018 Mitsubishi Eclipse cross-Pedal pads

2018 Mitsubishi Eclipse Cross pedal-pads — what they do and when to replace them

Based on the Mitsubishi Motors Service Manual for Eclipse Cross (GK/GL, 2018, Group 35 – Brakes: Brake Pedal) and the Mitsubishi ASA Electronic Parts Catalogue listings for the GK Eclipse Cross brake and clutch pedal assemblies, the 2018 model is factory-fitted with a removable rubber brake pedal pad on all variants. Manual-transmission models also use a separate clutch pedal pad. The accelerator is a moulded electronic pedal with a textured face, not a separate rubber pad. This setup aligns with safety expectations in Australian Design Rules and NZ WoF inspection practices that call for a slip-resistant pedal surface.

On a 2018 Eclipse Cross, the pedal pads are there to keep the driver’s foot planted, wet or dry. The rubber surface adds grip, helps manage pedal feel, and protects the metal pedal plate from wear. If the pad hardens, cracks, polishes smooth, or starts to walk off the plate, pedal control drops and stopping distances can blow out—hard no from a safety point of view and a likely fail at WoF/roadworthy time.

Servicing-wise, it’s a quick win. Have the pads inspected at each service (roughly every 10,000–15,000 km or 12 months). More frequent checks make sense if the vehicle sees lots of rain, beach runs, dirt, or work boots. Replace the pad if it’s shiny, brittle, split, missing chunks, or loose on the pedal. Genuine or OEM-spec pads are designed to fit the Eclipse Cross pedal plate snugly and give the right pedal feel.

• Signs it’s time to replace: smooth or glossy surface, visible cracks, hard plastic-like feel, pad slipping off a corner, or reduced grip in wet shoes.
• Quick replacement tips: pop off the old pad, clean the pedal plate with a mild degreaser, warm the new pad slightly (sunlight works) to add flexibility, then roll the lip over the plate until it seats evenly on all sides. No adhesives, no lubricants. Check for full engagement and a flat, even face.
• Clutch (manual models): treat it the same as the brake pad.
• Accelerator: it’s an integrated pedal, if the surface is damaged, the pedal assembly is typically replaced as a unit.

One last practical tip: make sure floor mats are clipped in properly and don’t ride up under the pedals—great pedal pads can’t help if a mat gets in the way.

Popular questions about 2018 Mitsubishi Eclipse Cross pedal-pads

Do all 2018 Eclipse Cross models have pedal pads?
Yes—every variant has a rubber brake pedal pad, manual models add a clutch pedal pad, and the accelerator uses an integrated textured pedal rather than a separate pad.

How long do the brake pedal pads usually last?
There’s no fixed lifespan, but 3–7 years is common depending on climate, footwear, and use. Inspect at every service and replace at the first sign of smoothness, cracking, or looseness.

Can I fit aftermarket alloy pedal covers?
You can, but choose ADR/WoF-compliant parts with proper grip and ensure they don’t foul the pedal or floor mat. If a cover reduces grip or alters pedal travel, it’s not suitable for road use.