Parts for your 2018 Mitsubishi Asx-Pedal pads

2018 Mitsubishi ASX pedal pads — what they do and when to replace them

Pedal pads are absolutely relevant to the 2018 Mitsubishi ASX. Technical references such as Mitsubishi’s ASA Electronic Parts Catalogue (covering ASX/Outlander Sport/RVR of this generation) list a rubber brake pedal pad for automatic models, and both brake and clutch pedal pads for manual models. The accelerator is an integrated pedal assembly without a separate rubber pad. The factory workshop manual also treats pedal pad condition as an inspection item during routine servicing of the brake/clutch pedals, highlighting grip and wear.

On a 2018 ASX, the pedal pads are the grippy rubber covers pressed over the metal brake (and clutch, if manual) pedals. Their job is simple but vital: provide a non-slip surface so the driver’s shoe stays planted, wet or dry. The pads’ ribbed pattern and compliant rubber (often EPDM or similar) help shed water and road grit while maintaining bite. In everyday Aussie and Kiwi conditions—think sudden downpours, sandy beach carparks, or muddy worksites—good pedal grip is a quiet safety hero.

Servicing-wise, it’s smart to give the pedal pads a quick look at every service interval. If the surface has gone shiny or hard, the ribs are worn flat, there are splits or chunks missing, or shoes slip when wet, it’s time to swap them. Replacement is inexpensive and fast, and it restores the crisp, confident feel underfoot that drivers expect.

Replacing the pads is a straightforward driveway job for most owners:

• Peel the old pad off the pedal plate (it’s a snug, tool-free fit).
• Warm the new pad in hot water to make it more pliable.
• Hook the top lip over the pedal plate, then work around the edges until fully seated in the groove.
• Press firmly to ensure the pad is evenly captured all the way around.

Tips for best results and longevity:

• Use the correct pad for your ASX variant (auto brake vs manual brake/clutch). Genuine or reputable aftermarket parts keep the fit right.
• Keep floor mats anchored so they can’t bunch up under the pedal.
• If you’ve been through mud, salt spray, or beach sand, rinse and dry the mats and give the pedals a wipe to keep grit from accelerating wear.
• During regular servicing, ask for a quick pad check—if there’s any doubt about grip, replacement is cheap insurance.

Bottom line: the 2018 ASX does use pedal pads where they count, and keeping them fresh is a simple way to protect braking and clutch control every day.

Do all 2018 Mitsubishi ASX models have pedal pads?

Every 2018 ASX has a rubber brake pedal pad. Manual versions also have a rubber clutch pedal pad. The accelerator is an integrated plastic/metal assembly and typically doesn’t use a separate rubber pad.

If you’re unsure which you need, check your build plate or VIN details, or compare the shape of your existing pedals before ordering.

How often should pedal pads be replaced on a 2018 ASX?

There’s no fixed kilometre interval—it’s all about condition. Inspect them at each service. Replace if the pad is shiny, hard, cracked, worn smooth, or if your shoe slips when wet. Many drivers find they last several years in normal use, but harsh conditions can speed up wear.

Can I fit universal metal or dress-up pedal covers?

It’s best to use ASX-specific pads that maintain proper grip and clearances. Universal covers can foul pedal operation or reduce traction if they’re not a perfect fit. If you prefer a style upgrade, choose a kit designed for the ASX and ensure the pedal surface remains non-slip in the wet.