Parts for your 2018 Mitsubishi Asx-Headlights

2018 Mitsubishi ASX Headlights

Headlights are absolutely fitted to the 2018 Mitsubishi ASX. This is confirmed by the ASX owner’s manual and Mitsubishi service literature for the model year, and aligns with legal requirements under Australia’s ADR 13/00 (lighting installation) and New Zealand’s Land Transport Rule: Vehicle Lighting 2004, which mandate operational headlamps for road use.

On the 2018 ASX, the headlights serve the classic dual role: helping the driver see clearly at night and in poor weather, and making the vehicle visible to others. Most examples run halogen projector low beams with integrated daytime running lamps, with market and trim variations. Regardless of variant, properly maintained headlights are key to safe, comfortable driving and to passing routine inspections, rego checks, or a WOF.

As part of regular servicing, it’s smart to include a quick headlight check. Look for dimming, colour shift, or intermittent operation—signs a bulb is on the way out. Replace bulbs in pairs to keep brightness and colour consistent across both sides. When swapping halogen globes, avoid touching the glass, skin oils can shorten life. After any bulb or housing change, confirm beam aim against a flat wall or have a workshop set alignment to spec so you don’t dazzle oncoming traffic or under-light the road.

Condensation inside the lens can appear after rain or a wash, if it clears within a day, it’s typically normal. Persistent moisture suggests a failed seal—worth correcting to prevent reflector damage. If a headlight is completely out, also check the appropriate fuse and the connector for corrosion. Where access is tight, removing the air intake snorkel or battery clamp (as per service procedures) can make bulb changes simpler and reduce the risk of broken clips.

Thinking about upgrades? LED or HID retrofit kits must comply with local rules. In Australia and New Zealand, replacement light sources and housings need to meet performance and installation standards, non-compliant retrofits can fail inspections. When in doubt, choose approved, road-legal components and have a technician verify aim and compliance.

• Inspect headlight operation every few months or 10,000 km.
• Clean lenses gently with car-safe products to avoid hazing.
• Keep spare approved bulbs in the vehicle for long trips.

Popular questions about 2018 Mitsubishi ASX headlights

Which bulb types are used in the 2018 ASX?
Bulb types vary by trim and market. Many 2018 ASX models use halogen projectors for low beam with a separate high beam. Owners should confirm exact bulb specifications in the owner’s manual or parts catalogue for their VIN to ensure the correct fit and wattage.

How often should ASX headlights be replaced?
There’s no fixed interval, replace on failure or when light output noticeably drops. Halogen globes can dim over time, so proactive replacement every few years, or before long night-time trips, helps maintain visibility and consistency between sides.

Are LED or HID upgrades legal on the 2018 ASX?
Only if they comply with Australian Design Rules and New Zealand’s Vehicle Lighting Rule. Many drop-in LED/HID kits for halogen housings aren’t compliant. Use approved components and have beam aim checked. Compliance and certification may be required depending on the setup.