Parts for your 2018 Holden Colorado-Exhaust mount

2018 Holden Colorado Exhaust Mount Maintenance and Replacement

The exhaust system on your 2018 Holden Colorado is an essential component that requires regular attention to keep the vehicle operating smoothly. A key part of this system is the exhaust mount, which ensures that everything stays in place as you drive. If your exhaust mount is failing, you will notice increased noise, reduced performance, or even vibrations throughout the cabin. Regular maintenance and timely replacement of this component can prevent potential issues that might affect your vehicle's performance.

Replacing your exhaust mount yourself can be a rewarding experience, provided you have some basic mechanical knowledge and tools at hand. If you prefer leaving it to the experts, a visit to your local mechanic for this service is just as effective. Below is a guide on how you can replace or maintain the exhaust mounts on your Holden Colorado as part of its regular servicing.

• Sourcing the Right Parts:

  Before beginning any work, ensure you have the right replacement parts. There are various types of exhaust mounts available, typically made from rubber or polyurethane. Rubber mounts provide excellent vibration absorption but might wear out more quickly over time. In contrast, polyurethane mounts offer increased durability and can withstand higher temperatures, albeit at the potential cost of slightly more noise and vibration. Make sure to choose the ones that align best with your driving habits and conditions.

• Safety First:

  Always prioritise safety when working on your vehicle. Ensure the car is on a level surface and the parking brake is engaged. It's crucial to use sturdy jack stands if you need to lift the vehicle to access the exhaust system. Double-check stability before you start working underneath the car to prevent accidents.

• Removing the Old Exhaust Mounts:
  1. Identify the location of the exhaust mounts. They are normally located along the exhaust system from the front to the rear of the vehicle.
  2. Remove any heat shields or covers obstructing access to the mounts using the appropriate toolset.
  3. Gently unbolt or slide off the old exhaust mounts. Due to heat exposure and age, they might be stubborn, so use a lubricant if needed to ease removal.
• Installing New Exhaust Mounts:
  1. Position the new mounts in place. If applicable, apply a small amount of silicone lubricant to make it easier to slide them into the holders.
  2. Secure the mounts by tightening any bolts or clips. Ensure they're firmly in place to avoid any rattling or movement during operation.
  3. Reattach any components you had to remove, such as heat shields or covers.

While exhaust mounts may not be top of mind in routine vehicle maintenance, they are no less critical. Keeping your exhaust mounts in good shape not only ensures a quieter and more comfortable driving experience but also maintains the overall health of your vehicle. As part of regular servicing, it's worth checking their condition every 20,000 to 30,000 kilometres, or sooner if you frequently drive on rough or bumpy roads that may accelerate wear and tear.

Remember, should you feel any uncertainty about performing the maintenance yourself, professional mechanics can efficiently handle the job. Regular checks for wear, timely replacement, and general awareness of their condition will keep your 2018 Holden Colorado running smoothly and save you from unexpected repairs or breakdowns on the road.