Parts for your 2018 Haval H6-Pedal pads

2018 Haval H6 Pedal Pads

Pedal pads are absolutely used on the 2018 Haval H6. Technical references that confirm this include the Haval H6 Owner’s Manual (2017–2019), the GWM/Haval Electronic Parts Catalogue (EPC) for the H6, and the H6 Service Manual chassis section. These sources show the brake pedal uses a removable rubber pedal pad, the manual-transmission model adds a clutch pedal pad, and the accelerator is typically an integral moulded pedal plate rather than a separate rubber cover.

On the H6, pedal pads do a simple but vital job: they provide a grippy, durable surface so shoes don’t slip when braking or clutching, especially in the wet or when hopping in with sandy or muddy soles. The factory rubber compound is designed to resist wear, oils and temperature swings common across Aussie and Kiwi conditions, while the tread pattern channels water away for consistent bite.

As part of regular servicing, it’s smart to check pedal pads for hardening, glossing, cracking, or edges that have curled back. If the surface has gone smooth, grip will drop off quickly in rain. Roadworthiness checks in Australia and WOF inspections in New Zealand expect non-slip pedal surfaces, so tired pads can become a fail point. Most owners won’t have a set interval, but a quick look every service and replacement every 3–6 years (or sooner for high‑kilometre, urban stop–start driving) keeps things safe and tidy.

• Replace straight away if the rubber is shiny/slick or cracks are visible.
• If the pad slides on the metal plate or won’t fully seat, bin it and fit a new one.
• Aftermarket alloy covers are fine only if securely mounted and non-slip.

Swapping pads is usually tool‑free: lever the old pad off the metal pedal plate and work the new one on, starting with the lower lip and rolling the upper edge over the plate. A quick clean of the bare pedal with a mild degreaser helps the new pad bite properly. For best fit and longevity, go OEM or a reputable brand listed for the 2018 H6. If the accelerator face is worn, it’s generally part of the pedal assembly rather than a replaceable pad, so that’s a different job altogether.

Does the 2018 Haval H6 have removable pedal pads?
Yes. The brake pedal has a removable rubber pad, and manual‑transmission models include a removable clutch pad. The accelerator is typically an integrated moulded pedal rather than a separate pad.

How often should pedal pads be replaced on an H6?
There’s no strict kilometre interval. Replace when the surface turns smooth or hard, shows cracks, or starts slipping on the pedal plate. A quick check at every service keeps things on the safe side.

Are alloy or dress‑up pedal covers legal in Australia and New Zealand?
They can be, provided they’re securely fixed, non‑slip, and don’t interfere with pedal travel. If the surface is slippery or the cover can shift, it won’t meet roadworthy or WOF expectations.