Parts for your 2018 Haval H6-Oil filter

2018 Haval H6 Oil Filter

Technical references—namely the 2018 Haval H6 owner’s manual, GWM/Haval workshop literature, and major AU/NZ parts catalogues—confirm the 2018 H6 is fitted with a replaceable engine oil filter. So yes, an oil filter is absolutely relevant on this model.

On this H6, the oil filter’s job is to trap the fine metal particles, carbon, and dust that build up in the engine oil as the turbocharged 1.5T/2.0T petrol engines do their thing. Keeping those nasties out of circulation protects bearings, lifters, and the turbocharger, helps the oil hold its viscosity for longer, and keeps start‑up wear to a minimum. In short, clean oil and a healthy filter mean smoother running and better engine life.

For local servicing, the accepted practice in Australia and New Zealand is to replace the oil filter at every engine oil change—typically every 10,000 km or 12 months, whichever comes first. If the H6 sees lots of short trips, towing, heavy traffic idling, or dusty roads, bring that interval forward. Workshop data for the H6 platforms backs up that regular, paired oil-and-filter service keeps the oil galleries clean and stabilises oil pressure across hot and cold starts.

Choosing the right filter is straightforward: match by VIN, engine code, and build date, and stick with an OEM or reputable aftermarket equivalent that meets the H6’s bypass pressure spec and includes an effective anti-drainback valve where required. Many AU/NZ-delivered H6 variants use a canister (spin-on) design, some engines in other markets use a cartridge element—so it pays to double-check.

Good servicing habits go a long way here. After installation, always check for leaks, confirm the old seal isn’t stuck to the housing, and use fresh engine oil of the correct spec. If the oil pressure warning lamp flickers, there’s noisy top end rattle on start-up, or the oil looks gritty soon after a change, don’t wait—inspect the filter and oil straight away.

• Replace the filter with every oil change (about 10,000 km/12 months).
• Use the correct spec filter and engine oil grade for the H6.
• Renew the sump plug washer, tighten to spec, and check for leaks after a short test drive.
• Dispose of used oil and filters responsibly at a recycling point.

FAQs

How often should the oil filter be changed on a 2018 Haval H6?
Most owners and workshops in AU/NZ change the filter at every oil service—about every 10,000 km or 12 months. If the H6 does lots of short trips, towing, or dusty work, shorten the interval to keep oil pressure stable and wear down.

Which oil filter type fits the 2018 H6?
Match the filter to the VIN/engine code. Many 2018 H6 vehicles here use a spin‑on canister, but some engines in other markets use a cartridge element. Go with OEM or a quality aftermarket filter that meets the correct bypass and anti‑drainback specs.

What are signs the oil filter needs attention?
Watch for a flickering oil pressure light, noisy valve train at start-up, or oil that turns gritty or inky-black soon after a change. Any of these warrant an immediate check of oil level, filter fitment, and filter condition.