Your Selected Vehicle
Parts for your 2017 Toyota Vitz|yaris-Interior bulbs
Explore 4WD & Adventure
Narva Marine 12V Saturn Dual Colour 75mm LED Interior Lamp with Touch Switch (White/Red) - 87501WRBL
Narva Marine 12V Saturn Dual Colour 130mm LED Interior Lamp with Touch Switch (White/Red) - 87503WRBL
2017 Toyota Vitz/Yaris interior-bulbs: fitted, handy, and easy to keep sorted
Based on technical references including the 2017 Toyota Vitz/Yaris owner’s manual for the XP130 series and Toyota’s Electronic Parts Catalogue, this model is fitted with interior-bulbs. The car carries room/courtesy (dome) and map lights, a luggage/boot lamp, and—depending on trim—vanity mirror and glovebox lamps. Some higher-grade variants use LED lamp units, but most trims feature replaceable globes.
The purpose of these interior-bulbs is simple and super practical: light the cabin for belt-ups, finding gear after dark, reading a map, or loading the boot without fumbling. They also play a safety role, helping occupants spot hazards and check child seats properly at night. When doors open, courtesy lighting makes hopping in and out far easier.
On the 2017 Vitz/Yaris, interior-bulbs are typically small W5W/T10 wedge globes for map and boot lamps, and a festoon globe (often around 31 mm) for the dome. Where Toyota fitted LED assemblies, the whole lamp unit may be replaced rather than a single globe. Because specifications vary by market and grade, owners should confirm the exact type in the glovebox manual or by reading the imprint on the lamp housing.
As part of routine servicing, it’s worth giving the interior-bulbs a quick check—dim, yellowed, or flickering light is a nudge they’re due. Replacement is straightforward:
- Switch the ignition and lights off, let hot globes cool, and protect trim with a plastic pry tool.
- Pop the lens gently, for wedge globes, pull straight out. For festoons, ease them from the spring clips.
- If upgrading to LED, match polarity and test before refitting the lens.
Choose quality globes with a warm-white colour for a factory look or cool-white LEDs for crisp visibility. If an LED module is factory-fitted and fails, replace the complete lamp assembly, forcing a globe swap can damage the housing. Keep fingerprints off glass where possible, and never exceed the specified wattage to avoid melted lenses or blown fuses.
If lights stay on or don’t come up, check the dome switch position, door-ajar switches, and the relevant fuse. After water ingress or a big clean-out, ensure lenses are dry to prevent misting. A quick interior-bulbs health check every few months keeps the Vitz/Yaris cabin bright with no dramas.
What interior-bulbs fit a 2017 Toyota Vitz/Yaris?
Most trims use W5W/T10 wedge globes for map and boot lamps and a ~31 mm festoon for the dome. Some grades have sealed LED modules. Always confirm against the owner’s manual or the marking on the lamp before purchase, as regional specs vary.
Can the 2017 Vitz/Yaris be upgraded to LED interior-bulbs?
Yes. Quality CANBUS-friendly LEDs work well for map, dome, and boot positions in globe-equipped trims. Check polarity, test before refitting the lens, and avoid overly blue lamps that can create glare.
Why do the interior-bulbs flicker or stay on?
Common causes include a tired globe, a loose festoon contact, a dirty door-ajar switch, or the dome switch left in ON. If fitted with LEDs, minor “ghost” glow can occur, choosing resistored LEDs usually sorts it. Check the relevant fuse if there’s no light at all.
