Parts for your 2017 Subaru Legacy-Pedal pads

2017 Subaru Legacy (Liberty) pedal pads — what they do and how to look after them

Pedal pads are relevant on the 2017 Subaru Legacy (sold as Liberty in Australia). Technical sources confirm the brake pedal uses a replaceable rubber pad, while the accelerator’s grip surface is integrated into the electronic pedal assembly and isn’t serviced as a separate pad. Most AU/NZ 2017 Liberty models are CVT-only, so there’s no clutch pedal pad to replace. References: Subaru Factory Service Manual (Legacy/Outback 2015–2019, Brake > Brake Pedal), Subaru Electronic Parts Catalogue for 2017 Legacy/Liberty (Pedal > Brake > Pad—Brake Pedal), and the 2017 Owner’s Manual guidance on keeping pedals clean and unobstructed.

The brake pedal pad is a tough rubber cover designed to give solid, slip-resistant grip in all weather. It’s a simple bit of kit, but it’s there for safety—especially when shoes are wet, sandy, or muddy. Over time, rubber hardens and polishes smooth, which can cause the foot to slide at the worst moment. That’s why a quick look at the pad is a smart part of regular servicing for a 2017 Subaru Legacy/Liberty.

What to watch for:

• Surface gone shiny or slippery, especially when damp.
• Cracks, splits, or perishing along the face or edges.
• Corners curling up, or the pad feeling loose on the metal pedal.
• Uneven wear that makes the pedal feel “lopsided” underfoot.

Care is straightforward. Give the pad a clean with mild soap and water, then dry it thoroughly. Avoid silicone dressings or greasy protectants—these make the pad slippery. If the pad is worn, replacement is quick and affordable: gently pry off the old rubber and press a quality new pad evenly over the pedal plate, checking that all lips are fully seated. A tech can do this in minutes during a service, but it’s also a tidy DIY if they’re confident.

As a rule of thumb, have the pad inspected at every service or tyre rotation. City traffic, lots of hill starts, or heavy work boots can speed up wear, some drivers will need a new pad every few years. Stick with genuine or reputable aftermarket parts that match the OEM profile so the pad can’t slip off or foul the pedal travel. The accelerator pedal has no separate pad on this model—if its tread face is damaged, the remedy is replacement of the pedal assembly.

Popular questions

How long does a brake pedal pad last on a 2017 Subaru Legacy/Liberty?
It varies with driving and footwear, but many owners see 3–8 years. High‑mileage city use or wet, gritty conditions wear pads faster. If it’s shiny, cracked, or feels slippery, it’s due—don’t wait for it to fail.

Can they replace the brake pedal pad at home?
Yes, if they’re handy. It’s a tool‑light job: peel off the old pad and press on the new one evenly. The key is ensuring the rubber lip is fully seated around the metal pedal so it can’t shift.

Does the accelerator pedal have a removable pad?
No. On the 2017 Legacy/Liberty the accelerator has a moulded tread built into the electronic pedal assembly. If the surface is damaged or worn, the complete assembly is replaced.