Parts for your 2017 Nissan Serena-Tail lights

Understanding and Maintaining Tail-Lights on the 2017 Nissan Serena

The 2017 Nissan Serena is a popular people mover, well known for its practicality, comfort, and family-friendly features. One key component of its safety and visibility system is the tail-lights. Tail-lights are definitely fitted on the 2017 Nissan Serena, as with most modern vehicles, and they play a vital role in road safety. This article dives into the purpose of the tail-lights on the 2017 Nissan Serena and offers some handy advice on replacement and maintenance to keep them working at their best.

Tail-lights are the red lights located at the rear of the vehicle that illuminate when the headlights or parking lights are turned on. They are essential to ensure that your Nissan Serena is visible to other road users during low light conditions, such as dusk, night-time, or bad weather like rain or fog. Without functioning tail-lights, you risk being less visible, increasing the chances of a rear-end collision. Tail-lights also work in conjunction with brake lights and indicators to communicate your driving intentions to others on the road.

For a vehicle like the 2017 Nissan Serena, which often carries multiple passengers and sometimes navigates tight suburban streets or highways, having fully operational tail-lights is even more crucial. They contribute significantly to the overall safety profile of the vehicle by ensuring it can be easily spotted in traffic from behind.

When it comes to keeping the tail-lights in tip-top shape, regular checks and maintenance are a must. Here are some practical tips every Nissan Serena owner should keep in mind:

• Regular Inspection: It's a good habit to inspect the tail-lights at least once a month. Check for any cracks, cloudiness, or moisture build-up inside the lens. These issues can reduce the brightness of the lights and compromise visibility.
• Cleanliness: Dirt and grime often build up over time, especially if the vehicle is driven on dusty roads or in wet conditions. Gently clean the outside of the tail-lights with a soft cloth and mild detergent to keep them shining bright.
• Check Bulbs: Tail-light bulbs can burn out or dim over time. Make sure they are working by turning on the headlights and observing the tail-lights from behind. If a bulb seems dim or doesn't light up at all, it's time for a replacement.
• Seal Integrity: The tail-lights are sealed units to prevent water ingress. However, seals can degrade with age. Keep an eye out for any water droplets or foggy condensation inside the lenses. If you spot any, this could mean the seals are compromised and should be repaired or replaced to prevent electrical issues.

Replacing tail-light bulbs on the 2017 Nissan Serena is usually straightforward. The tail-light cluster can be accessed from inside the boot area or rear panel. It often involves removing a few screws or clips holding the cluster in place, unplugging the electrical connector, and then swapping out the bulbs. Owners can do this themselves with a bit of patience and the right tools, but if unsure, seeking help from a professional mechanic or taken to a Nissan dealership is recommended to avoid damage and ensure compatibility.

It's good to note that the 2017 Serena might use standard filament bulbs or LED units depending on the specific trim or model variant. LED tail-lights last longer and consume less power but can be more expensive to replace if they fail and usually require the replacement of the entire tail-light assembly. On the other hand, traditional bulbs are relatively cheap and easy to swap but have a shorter lifespan.

With servicing, Nissan recommends tail-light checks as part of routine vehicle safety inspections. This involves not only a visual check but also verifying that all lighting functions related to the tail-lights, including brake lights and indicators, work perfectly. Failure to maintain these lights can lead to fines if caught driving with faulty lighting and increases the risk of accidents, so it is worth taking these checks seriously.

Additionally, if any damage occurs due to minor collisions or impacts, the tail-light housing or lens might crack or break, which means it will need replacement. Damaged tail-lights not only affect the exterior look of the Nissan Serena but also let moisture in and reduce lighting efficiency.

To get the best performance from tail-lights on a 2017 Nissan Serena, it's important to consider timing when replacing bulbs or assemblies. Using OEM (original equipment manufacturer) parts designed specifically for the Serena ensures fitment and performance match manufacturer specifications. While aftermarket options may be cheaper, they can affect light output and longevity, which impacts safety.

Ultimately, the tail-lights on the 2017 Nissan Serena are a small but mighty component that contributes massively to the safety and road presence of the vehicle. Whether taking the kids to school, cruising on a weekend getaway, or tackling city traffic, those rear lights make sure the Serena is visible and communicates intentions clearly to other drivers. Taking a little time to inspect, clean, and replace tail-lights as needed is one simple way of looking after the vehicle while keeping everyone on the road safer.