Your Selected Vehicle
Parts for your 2017 Mitsubishi Outlander-Interior bulbs
Explore 4WD & Adventure
Narva Marine 12V Saturn Dual Colour 75mm LED Interior Lamp with Touch Switch (White/Red) - 87501WRBL
Narva Marine 12V Saturn Dual Colour 130mm LED Interior Lamp with Touch Switch (White/Red) - 87503WRBL
2017 Mitsubishi Outlander interior-bulbs — purpose, care and replacement
Per the 2017 Mitsubishi Outlander Owner’s Manual and Mitsubishi Motors service literature for the GF/GG platform, this model is fitted with multiple interior-bulbs across the cabin — map/room lights, rear dome, boot area, glove box, vanity mirrors and door courtesy lamps. So yes, interior-bulbs are absolutely relevant on the 2017 Mitsubishi Outlander. Depending on trim and market, most are traditional replaceable bulbs (commonly wedge and festoon types), while a few variants may use LED modules for specific lamps.
These interior-bulbs do the everyday heavy lifting: lighting up the cabin at night, helping find seatbelt latches, illuminating the boot so gear isn’t left behind, and providing a handy glow for reading or sorting the pram. Good interior lighting makes the Outlander feel more welcoming and safer to use after dark.
As part of routine servicing or when a bulb blows, replacement is straightforward. It’s best to stick with the specified wattage so the lenses don’t overheat and the battery isn’t strained. If upgrading to LED, choose quality bulbs with the correct base, ensure they’re CANBUS-friendly if needed, and note LEDs have polarity — flip them 180° if they don’t light first go.
- Switch the ignition and interior lights off, let hot bulbs cool.
- Use a plastic trim tool to pop the lens, avoid metal screwdrivers that can mark the trim.
- Remove the old bulb carefully. For halogens, wear clean gloves to keep oils off the glass.
- Install the new bulb with the same base type. Test before refitting the lens.
- Click the lens back in and confirm the switch positions (Door/On/Off) operate correctly.
Handy tips for Outlander owners:
- Common interior-bulb styles include wedge (T10/W5W) and festoon (around 31 mm). Always confirm against the existing bulb or the owner’s manual.
- If lights flicker or stay on, check the room light switch position, door-ajar switches, and the ROOM fuse. The timed fade and battery saver functions are managed by the body control module.
- Keep lenses clean with a microfibre cloth, hazy lenses cut brightness.
- Some trims with factory LED modules may require replacing the lamp assembly rather than just a bulb — a quick check behind the lens will tell the story.
Look after the Outlander’s interior-bulbs and they’ll look after you — brighter cabins, fewer fumbles, and less chance of a flat battery after a long weekend away.
Popular questions about 2017 Mitsubishi Outlander interior-bulbs
What bulb types fit the Outlander’s interior lights?
Most 2017 Outlanders use a mix of wedge (T10/W5W) and festoon (about 31 mm) bulbs for map, dome and boot lights. Trims and markets vary, and a few lamps may be LED modules. The safest bet is to match the existing bulb or check the owner’s manual before buying.
Why do my interior lights stay on and drain the battery?
Usually the room light switch is set to On instead of Door, or a door switch isn’t registering closed. The Outlander has a battery saver that times lights out, but if they don’t fade off, check the switch positions, door latches, ROOM fuse and, if needed, have the body control module diagnosed.
Can I upgrade to LED interior-bulbs?
Yes. LED upgrades deliver brighter, whiter light with lower draw and less heat. Choose the correct bases, ensure polarity is correct, and pick reputable LEDs to avoid flicker. Keep colour temperature sensible (around 4,000–6,000 K) for a clean factory look without harsh glare.
