Your Selected Vehicle
Parts for your 2017 Mitsubishi Asx-Brake fluid
Explore 4WD & Adventure
2017 Mitsubishi ASX Brake Fluid — What It Does and When to Change It
Brake fluid is absolutely relevant and used in the 2017 Mitsubishi ASX. The model runs a conventional hydraulic braking system with ABS/EBD, which relies on brake fluid to transmit pedal force to the brakes. Technical sources including the 2017 Mitsubishi ASX owner’s manual and Mitsubishi service literature specify glycol-based brake fluid (DOT 3 or DOT 4) and include periodic replacement as part of scheduled servicing.
In the ASX, brake fluid’s job is to transfer pressure from the pedal to the master cylinder, lines, ABS modulator and calipers. Because it’s incompressible, it translates a modest push into strong, consistent stopping power. It also lubricates internal components and resists boiling under high temperatures, which is crucial during long downhill runs or towing. That’s why using the correct spec (DOT 3 or DOT 4) from a sealed container matters.
Over time, brake fluid absorbs moisture from the air (it’s hygroscopic). Water in the fluid lowers its boiling point and can trigger a soft pedal, longer stopping distances and potential fade under load. It can also encourage internal corrosion in the ABS modulator, calipers and master cylinder. Mitsubishi service guidance typically calls for a brake fluid change about every 24 months, regardless of kilometres. Many workshops in Australia and New Zealand also test moisture content or boiling point at routine services and recommend a flush if it’s out of spec or if the fluid is dark/contaminated.
- Use only DOT 3 or DOT 4 fluid that meets Mitsubishi’s spec, don’t mix with mineral oil or silicone-based fluids.
- Keep the reservoir cap area clean before opening, and only top up from a fresh, sealed bottle.
- If the level drops, have the system inspected for pad wear or leaks rather than just topping up.
- Ask for a full flush (not just a top-up) at replacement time so all corners and the ABS unit get fresh fluid.
Signs the ASX may need attention include a spongy or sinking pedal, fluid that looks dark or murky, ABS warnings, or a burning smell after hard braking. If any of that crops up, it’s worth booking the vehicle into a trusted workshop promptly.
Popular questions about 2017 Mitsubishi ASX brake fluid
What brake fluid does a 2017 Mitsubishi ASX use?
It’s designed for glycol-based DOT 3 or DOT 4 brake fluid that meets Mitsubishi specifications. Many owners and workshops in AU/NZ choose DOT 4 for its higher boiling point, but DOT 3 remains acceptable if specified in the owner’s manual. Always use fresh fluid from a sealed container.
How often should brake fluid be changed on a 2017 ASX?
Plan on every 24 months as a rule of thumb, regardless of kilometres. If the vehicle tows, sees alpine driving or frequent stop–start city work, a fluid test at each service is smart—replace earlier if moisture content or boiling point is out of spec.
What are the signs my ASX needs brake fluid service?
Look for a soft or spongy pedal, fluid that’s turned dark, the ABS light staying on, or a longer stopping distance. Any of these justify an immediate inspection and likely a full flush with the correct DOT-rated fluid.
