Your Selected Vehicle
Parts for your 2017 Mazda Bt-50-Batteries
OEX 3mm Twin Core Automotive Cable, Figure 8, White with Black Trace - 30m Roll (NZ Ref.151) - ACX0832
Fitment Notes:
Narva Sealed Rocker Switch Off/On/On DPDT 12/24V Blue LED (Contacts Rated 20A @ 12V) - 63171BL
Fitment Notes:
OEX Toggle Switch Mom On - Off - Mom On - DPDT (Contacts Rated 20A) IP68 - ACX7636
Fitment Notes:
Explore 4WD & Adventure
Narva Sealed Rocker Switch Off/Momentary On SPST 12/24V Red LED (Contacts Rated 20A @ 12V) - 63164BL
Fitment Notes:
Narva Crimp Terminal Female Blade Yellow Terminal Entry 6.3 x 0.8mm Heat Shrinkable 50 Pce - 56332
Fitment Notes:
Narva Crimp Terminal Male Blade Yellow Terminal Entry 6.3 x 0.8mm Heat Shrinkable 50Pk - 56324
Fitment Notes:
Narva Sealed Rocker Switch Off/Momentary On SPST 12/24V Blue LED (Contacts Rated 20A @ 12V) - 63165BL
Fitment Notes:
Narva Sealed Rocker Switch Off/On/On DPDT Red LED (Contacts Rated 20A @ 12V) - 63170BL
Fitment Notes:
OEX 3mm Twin Core Automotive Cable, Figure 8, Brown With White Trace - 30m Roll (NZ Ref.151) - ACX0803
Fitment Notes:
OEX 2.5mm Single Core Automotive Cable, Yellow - 100m Roll (NZ Ref.148) - ACX0697L
Fitment Notes:
Narva Push Button Switch Off/On SPST Red LED (Contacts Rated 10A @ 15V) - 60076BL
Fitment Notes:
Maintaining and Replacing Your Mazda BT-50 Battery
Keeping your 2017 Mazda BT-50 running smoothly means ensuring that its battery is in top-notch condition. The battery is a critical component, providing the necessary power to start your engine and run electrical systems. Knowing when and how to service or replace it can prevent unexpected breakdowns and maintain vehicle reliability.
When it comes to battery replacement, there are a few key aspects to consider. First, it's crucial to select the right battery type for your BT-50. The most common option is a 12V lead-acid battery, but the specific group size and CCA rating are important too. Check your owner's manual or consult with a professional to find the correct specifications.
If you notice slow engine cranking, dim lights, or electrical issues, these may be signs your battery is nearing the end of its life. Ideally, car batteries should be checked regularly and typically replaced every three to five years, although this can vary depending on usage conditions and maintenance habits.
- Visual Inspection: Look for any signs of corrosion on the terminals or battery case. Clean if necessary using a mixture of baking soda and water to neutralise acid buildup. Remember to wear protective gear when handling battery acid.
- Check Connections: Ensure that the battery terminals and cables are tightly secured to prevent interruptions in power supply.
- Battery Testing: Use a multimeter to measure the voltage. A healthy battery should read around 12.6 volts when the engine is off. Consider having a professional conduct a load test to verify battery condition under typical operating conditions.
Replacing your battery? Disconnect the negative terminal first, followed by the positive to prevent short circuits. Carefully remove the old battery and place it aside, taking note of any leaking or damage. Install the new battery, securing it in place before reconnecting the terminals - positive first, then negative.
For extended battery life, try to minimise short trips, as these do not allow the battery to fully recharge. Invest in a trickle charger if your BT-50 sits unused for prolonged periods. Regular driving is the best way to keep your battery charged and in good shape.
By maintaining your BT-50 battery, you'll enjoy dependable performance and avoid inconvenient disruptions. If in doubt, consult a professional mechanic to ensure your vehicle's battery stays in top condition.