Your Selected Vehicle
Parts for your 2017 Honda Civic-Interior bulbs
LEDAUT 12V LED Interior Light 31PCS SMD LEDs Equivalent To 15 Watt Globe Blister Pack - 1031
LEDAUT 24V LED Interior Light 61 PCS SMD LEDs Equivalent To 30 Watt Globe - 1061/24
LEDAUT 12V LED Interior Light 61PCS SMD LEDs Equivalent To 30W Globe With Switch - 1061/12SW
Narva Marine 12V Saturn Dual Colour 75mm LED Interior Lamp with Touch Switch (White/Red) - 87501WRBL
Explore 4WD & Adventure
Narva Marine 12V Saturn Dual Colour 130mm LED Interior Lamp with Touch Switch (White/Red) - 87503WRBL
LED Autolamps 12V Interior Strip Lamp With Touch Sensor Switch With MCU Circuitry - 40770MCU
LED Autolamps 12V Interior Strip Light With Touch Sensor Switch With MCU Circuitry - 40410MCU
LEDAUT 12V LED Interior Light 61PCS SMD LEDs Clear Lens With White Frame Blister Pack - 1061
LED Autolamps 12V Interior Strip lamp Touch Sensor Switch With MCU Circuitry - 40260SMCU
2017 Honda Civic interior bulbs: purpose, care, and replacement tips
Interior bulbs are absolutely used on the 2017 Honda Civic. Honda’s own technical literature confirms it: the 2017 Civic Owner’s Manual (Interior Lights section) describes the map, dome, and cargo area lights, and the Honda Service Information and Electronic Parts Catalogue for the 2017 Civic list the relevant interior lamp assemblies and service parts. Depending on trim, some lamps are traditional replaceable bulbs while others are integrated LED units that require replacing the lamp assembly if they fail.
Inside a 2017 Civic, interior bulbs light the cabin so it’s easy to find things at night, read a map, or keep an eye on the kids in the back. They also work as courtesy and safety lighting when getting in or out, or loading the boot. Common locations include:
- Front map/reading lights and a centre dome light
- Boot/cargo light
- Glovebox and vanity mirror lights (if fitted)
For servicing, it’s worth checking interior lights any time the vehicle is in for maintenance, or if there’s a flicker, dim glow, or a lamp that stays on. If the Civic is fitted with replaceable bulbs, they’re typically small wedge or festoon types behind snap-in lenses. Always switch the light off first, and use a trim tool to gently release the lens to avoid marking the headlining. Handle new bulbs with clean hands, fingerprints on hot glass can shorten life. If a lamp is an LED module (common on higher trims), it’s not a simple globe swap—Honda specifies replacing the complete lamp assembly.
Owners who leave doors open while cleaning or detailing should use the door/courtesy light “off” position to prevent draining the battery. If a light won’t turn off, check the switch positions on the lamp, confirm all doors and the boot are fully closed, and inspect the relevant fuse listed in the owner’s manual.
When upgrading to LEDs, choose CANbus-friendly globes where needed to prevent faint afterglow, and match the colour temperature to the rest of the cabin so the lighting looks neat. As always, confirm the exact bulb or assembly part number against the 2017 Civic Owner’s Manual or the Honda parts catalogue for the specific body style and trim.
Popular questions about 2017 Honda Civic interior bulbs
Are the 2017 Honda Civic’s interior lights LED or regular bulbs?
It depends on the trim and market. Many 2017 Civics use a mix—some positions have standard replaceable bulbs, while others (often map or dome lights on higher trims) are integrated LED lamp assemblies. The Owner’s Manual and the Honda parts catalogue for the specific VIN will show which type is fitted.
Can a blown interior bulb be replaced at home?
If the lamp uses a standard replaceable globe, yes—access is usually behind a snap-in lens. If it’s an LED module, Honda specifies replacing the complete lamp assembly. A trim tool, gentle leverage, and the correct replacement part make the job straightforward for most DIYers.
Why do my interior lights stay dimly lit after I switch them off?
Some aftermarket LED globes can faintly glow due to residual current in the circuit. Choosing CANbus-compatible LEDs or reverting to the specified globe type usually resolves it. If the issue occurs with factory lighting, check switch positions and door/boot latches, then inspect the relevant fuse or consult a technician.