Parts for your 2017 Holden Barina-Pedal pads

2017 Holden Barina Pedal Pads — What They Do and When to Replace Them

Pedal pads are relevant and fitted to the 2017 Holden Barina (TM series). Technical references such as the Holden/GM Electronic Parts Catalogue (EPC) for the TM Barina MY17 and the factory workshop manual list a serviceable rubber brake pedal pad for all variants, with an additional clutch pedal pad on manual models. The accelerator uses an integrated plastic/metal pedal assembly without a separate removable pad. Owner guidance in Holden documentation also calls for keeping pedal surfaces clean and non-slip, reinforcing that these pads are considered maintenance items.

On this Barina, pedal pads provide grippy, non-slip contact on the brake (and clutch, if manual). They’re designed to maintain boot traction in wet or muddy conditions, reduce foot fatigue, and protect the metal pedal arm. Over time, the rubber can harden, wear smooth, crack, or loosen, which increases stopping risk—especially in the wet.

Variants: All 2017 Barina automatics have a replaceable brake pedal pad. Manuals have both brake and clutch pads. The accelerator pedal is an electronic module, it typically isn’t serviced with a separate pad and is replaced as an assembly only if faulty or damaged.

As part of routine servicing, a quick pedal pad inspection is smart. A workshop will usually check for wear each service or at least annually. Replacement is straightforward: the old rubber pad is peeled off the metal pedal plate and a new pad is pressed on, making sure the lip seats fully around the perimeter. Using quality OEM or reputable aftermarket rubber helps maintain the correct fit and grip.

• Replace if the surface is shiny/slick, cracked, or perished
• Replace if the pad can be twisted on the pedal or the edges curl
• Replace sooner if frequently driving in wet, sandy, or muddy conditions

Maintenance tips: keep the pad clean with mild soap and water—no silicone dressings or greasy cleaners, as they reduce friction. After beach trips or wet-weather use, rinse off grit and check for embedded stones. For manual Barinas, make sure clutch and brake pads wear at a similar rate, mismatched grip can feel odd and affect control.

• Avoid solvent-based cleaners that dry out rubber
• Check fit after any interior detailing or mat changes
• Confirm floor mats don’t interfere with pedal travel

Popular questions

Which pedals on a 2017 Holden Barina have replaceable pads?
All variants have a replaceable brake pedal pad. Manual models also have a replaceable clutch pedal pad. The accelerator is an electronic pedal assembly and doesn’t use a separate rubber pad.

How often should pedal pads be replaced on a Barina?
There’s no fixed kilometre interval. Replace when the rubber is smooth, cracked, hard, or loose. For most owners this may be every few years, but high-use, wet, or gritty conditions can shorten that timeframe. They’re quick and inexpensive to change as part of a regular service.

Can worn pedal pads affect a WOF or roadworthy check?
Yes. Excessively worn or slippery brake/clutch pedal surfaces can be flagged because they reduce safe pedal control. Fresh pads restore grip and help meet safety expectations.