Parts for your 2017 Haval H6-Oil filter

2017 Haval H6 oil filter — what it does and when to change it

The 2017 Haval H6 is fitted with a replaceable engine oil filter, so it’s absolutely relevant to servicing this model. This is confirmed by Haval’s 2017 H6 owner’s manual (engine lubrication section), Great Wall Motors’ H6 parts catalogue listing an oil filter element for the GW4C20-series 2.0‑litre turbo petrol engine, and AU/NZ aftermarket application guides from major filter brands. No matter the trim, the H6 runs a full-flow oil filter to keep the turbocharged four-cylinder happy.

What does the oil filter actually do? It traps fine metal particles, carbon and sludge so the oil stays clean, maintains stable pressure and protects tight-clearance parts like the turbo, camshafts and bearings. Clean oil means less wear, better performance and fewer headaches under the bonnet.

As part of regular servicing, the oil filter should be replaced at the same time as the engine oil. For everyday driving in Australia and New Zealand, a 10,000 km or 12‑month interval (whichever comes first) is a sensible guide. If the H6 does lots of short trips, idling, dusty rural runs or towing, shorten that interval to keep things in top nick.

Most 2017 H6 examples use a cartridge element in a reusable housing. That means swapping the element, renewing the housing O‑rings and refitting the cap to specification. If a spin‑on canister is fitted on a particular engine variant, the same principles apply: ensure the old gasket isn’t stuck, lightly oil the new seal and tighten as directed by the manufacturer.

• Always use the correct spec engine oil noted in the H6 handbook, the filter’s job is easier with the right oil.
• Replace crush washers or seals where applicable to avoid weeps around the housing.
• After starting, let the engine idle and check for leaks while oil pressure stabilises.
• Dispose of used oil and the old filter at an approved recycling facility.

Signs the H6 may be overdue for an oil and filter change include noisy top end on cold start, oil looking inky-black immediately after a service, or warning lights for oil pressure. Sticking with a quality, correctly specified filter from a recognised brand keeps the warranty intact and the turbo spooling sweet.

Popular questions about 2017 Haval H6 oil filters

What’s the recommended oil filter change interval on a 2017 Haval H6?
For local conditions, replacing the oil filter every 10,000 kilometres or 12 months works well. If the vehicle sees heavy traffic, short trips, dusty roads or towing, bring that forward to protect the turbo and reduce sludge build-up.

Is the 2017 H6 oil filter a cartridge or a spin‑on?
Most 2017 H6 petrol turbo engines use a cartridge element inside a housing on the engine. The service involves a new cartridge plus fresh O‑rings. Some markets list spin‑on options, so it’s best to check the engine code and VIN against a parts catalogue before ordering.

Do I need to pre‑fill the oil filter?
If it’s a cartridge type, pre‑filling isn’t required, just lubricate the O‑rings and refit the cap correctly. For spin‑on filters, pre‑filling can help reduce the time to full oil pressure, but take care not to spill and always follow the filter maker’s instructions.