Your Selected Vehicle
Parts for your 2017 Haval H6-Interior bulbs
Explore 4WD & Adventure
Narva Marine 12V Saturn Dual Colour 75mm LED Interior Lamp with Touch Switch (White/Red) - 87501WRBL
Narva Marine 12V Saturn Dual Colour 130mm LED Interior Lamp with Touch Switch (White/Red) - 87503WRBL
2017 Haval H6 interior bulbs — purpose, care and easy replacement
Based on technical references including the 2017 Haval H6 Owner’s Manual (Interior Lights and Fuses sections) and Haval/Great Wall body-electrical wiring diagrams used by workshop repair data providers, the 2017 Haval H6 is fitted with interior bulbs. These cover courtesy/dome, front map lights, luggage/boot, glovebox and vanity mirror illumination, with some trims using traditional globes and others using integrated LED modules.
The point of these cabin lights is simple but important: they make the H6 easy to live with after dark, helping passengers find belts and belongings, lighting the boot for the weekly shop, and improving safety when entering or exiting the vehicle. Most variants commonly use T10/W5W wedge globes and 31 mm festoon globes, while higher-spec models may run LED assemblies. Always confirm the exact type in the owner’s manual or by visual check before ordering parts.
As part of routine servicing, it’s smart to check the operation of all interior lights every 10,000–15,000 km or annually. Keep lenses clean with a soft microfibre cloth and a mild interior cleaner, hazy or yellowed lenses can dim output. If upgrading to LEDs, choose warm-white, CANBUS-friendly lamps to avoid dash messages or faint after-glow.
- Signs a replacement’s due: dim or flickering output, no light on door-open, burnt or blackened filament, intermittent operation over bumps.
- Switch the ignition off and let any hot bulbs cool. Use a plastic trim tool to gently release the lens of the dome, map, or boot light.
- Note the bulb type and orientation. Replace like-for-like, for LEDs, observe polarity.
- Test before refitting the lens. Don’t exceed the specified wattage to avoid heat damage.
- If the light still doesn’t work, check the relevant ROOM/INTERIOR fuse in the cabin fuse panel and the door switch settings.
For H6 variants with sealed LED modules, replacement usually means swapping the entire lamp unit rather than a globe. That’s still a quick job for a technician and avoids mismatched colour temperatures across the cabin.
During scheduled servicing, a quick once-over of the courtesy delay function, door-ajar switches and boot lamp operation keeps the H6’s interior lighting crisp and reliable. It’s a small check that makes a big difference on those early starts and late-night returns.
What bulb sizes fit the 2017 Haval H6 interior lights?
Most 2017 H6 models use a mix of T10/W5W wedge globes and 31 mm festoon globes for dome, map and boot lights, while some higher trims run integrated LED modules. Because specifications vary by market and trim, confirm via the owner’s manual or by removing a lens and checking the globe before purchasing replacements.
How do you replace a Haval H6 dome or map light?
Turn the ignition off, carefully pry the lens with a plastic trim tool, remove the old globe, and install the correct replacement. Test it before clipping the lens back on. For LED upgrades, ensure correct polarity and use CANBUS-friendly bulbs to prevent flicker or error messages.
Can the H6’s interior bulbs be upgraded to LED without issues?
Yes. Choose warm-white, CANBUS-safe LEDs sized to match the original globes. If a light glows faintly when off, swap to a resistor-equipped LED or add a load resistor. Avoid excessive brightness that can cause glare, and keep colour temperature consistent across the cabin.
