Parts for your 2017 Ford Everest-Engine oil

Engine Oil Maintenance for Your 2017 Ford Everest

The 2017 Ford Everest is a robust SUV that thrives on adventure, but to keep it performing at its best, regular engine oil maintenance is crucial. The engine oil is like the lifeblood of your vehicle. It keeps the engine components lubricated, reduces friction, and helps to cool down the engine. Choosing the right engine oil and adhering to recommended oil change intervals can make a significant difference in the longevity and performance of your Ford Everest.

For the 2017 Ford Everest, using the correct specification of engine oil is paramount. The manufacturer typically recommends a specific type of oil that aligns with the vehicle's engine requirements. It's advisable to check the owner's manual for the recommended oil grade and viscosity. Commonly, Ford vehicles perform well with a synthetic blend or full synthetic oil, often in the 5W-30 viscosity range, but always refer to the manual for specifics tied to your vehicle's variant and engine model.

• The first step in engine oil maintenance is regular checks. It's a good practice to check the oil levels at least once a month. Make sure the vehicle is on a level surface and the engine is cool or has been off for at least five minutes. Pull out the dipstick, wipe it clean, reinsert, and then withdraw it again to check the oil level. If the oil is below the recommended level, top it up with the correct oil type.
• Changing the oil at regular intervals is crucial. For the 2017 Ford Everest, typical intervals might be every 10,000 to 15,000 kilometres or 12 months, whichever comes first. However, this can vary based on driving conditions and habits. Vehicles driven in harsh conditions or undertaking substantial off-road adventures might require more frequent oil changes.

When it comes to changing the oil, gathering the right tools and supplies is essential. You'll need a new oil filter, a replacement sump plug washer, the correct volume of oil, an oil filter wrench, a socket set, and a drain pan. Here's a step-by-step guide to consider for a smooth oil change process:

1. Start by warming up the engine for a few minutes to make the oil less viscous, ensuring it drains out smoothly. Then, turn off the engine and ensure the vehicle is parked on a flat surface and on jack stands if necessary.
2. Place the drain pan under the oil pan, then unscrew the oil drain plug with the socket set to allow the old oil to drain completely. Remember to replace the old washer with a new one when you reattach the drain plug.
3. Remove the old oil filter using the oil filter wrench. Make sure the rubber seal comes out with the old filter and doesn't stick to the housing. Lightly lubricate the new filter's rubber seal and install it by hand to avoid overtightening.
4. Pour the new oil into the engine using a funnel to avoid spills. Reinsert the dipstick and check the oil level. Start the engine and let it run for a few minutes. This allows the new oil to circulate and gives you a chance to check for leaks.

Finally, dispose of the old oil and filter responsibly. Many service stations or automotive shops offer oil recycling facilities. Regular maintenance and proper disposal are part of being a responsible vehicle owner and help in minimizing environmental impact.

Maintaining the engine oil in your 2017 Ford Everest isn't just about keeping your SUV running smoothly, it's about ensuring safety, efficiency, and performance. Setting reminders for your next oil change date or mileage helps in maintaining consistency. Pay attention to any dashboard oil alerts and consider them signals to check your oil levels. By dedicating a little time to engine oil care, you're ensuring that your Evergreen buddy can take on any road with confidence and reliability.