Parts for your 2017 Audi Q5-Oil filter

2017 Audi Q5 oil filter — purpose, fitment and service advice

Yes, an oil filter is absolutely used on the 2017 Audi Q5. Audi’s factory repair information (ElsaPro/ElsaWin) and the Audi parts catalogue (ETKA) list a serviceable engine oil filter for all 2017 Q5 engines, including the 2.0 TFSI petrol and the 2.0/3.0 TDI diesels. Typical OE examples include 06L 115 562 for many 2.0 TFSI engines, 04L 115 466 for several 2.0 TDI variants, and 057 115 562 for common 3.0 TDI applications. That confirms the oil filter is a relevant, routine service item on this model year.

On a 2017 Audi Q5, the oil filter’s job is to trap fine metal particles, carbon, sludge and dust so they don’t circulate through the engine. Clean, well‑filtered oil protects tight-bearing surfaces, turbochargers, cam phasers and timing chain guides, helping the engine run smoothly and last longer. It also helps maintain stable oil pressure and reduces wear during cold starts—key for both city commuting and open-road touring across Australia and New Zealand.

Replacement intervals in AU/NZ are generally every 15,000 kilometres or 12 months, whichever comes first, and the oil filter should be changed at every oil change. Some vehicles set up for variable (LongLife) servicing in other markets can stretch further, but local fuel, climate and driving patterns typically favour the fixed interval. Always match the oil spec to the engine: VW 502 00/504 00 for most petrols and VW 507 00 for most diesels in this generation.

Good practice during servicing includes replacing the filter element and its O‑ring, lightly oiling the new O‑ring, and installing it in the correct groove. Fit the cap and tighten to the specified torque in the Audi repair manual. Use a new sump plug washer, reset the service reminder in the MMI, and let the engine idle briefly to build pressure before checking for leaks. A quality filter helps avoid start‑up rattle, premature turbo wear and varnish build‑up.

Signs the filter and oil are past their best include increased engine noise on start-up, a rougher idle, darker or gritty oil on the dipstick, and shortened oil life readings. For anyone towing, doing lots of short trips, or driving in hot, dusty conditions, changing oil and filter a little earlier is cheap insurance.

• Replace the oil filter with every oil change (12 months/15,000 km in AU/NZ).
• Use the correct VW oil spec for your engine and a quality filter element.
• Fit a new O‑ring, torque the cap correctly, and check for leaks after start‑up.

Popular questions

What oil filter does a 2017 Audi Q5 use?
Most 2017 Q5 engines use a replaceable cartridge element in a housing on the engine. Common examples are 06L 115 562 for many 2.0 TFSI petrol engines, 04L 115 466 for several 2.0 TDI diesels, and 057 115 562 for 3.0 TDI variants. Part numbers can vary by engine code and VIN, so it’s best to confirm against the vehicle’s build data.

How often should the oil filter be changed in Australia or New Zealand?
Audi’s local servicing typically specifies every 12 months or 15,000 kilometres, whichever comes first, with the oil filter changed at the same time as the oil. If the Q5 tows, does frequent short trips, or operates in hot, dusty conditions, bring that interval forward for extra protection.

Can a 2017 Q5 oil filter be changed at home?
Yes, competent DIYers with the right tools can do it. The filter is usually top‑mounted, so access is straightforward. Use the correct socket for the housing cap, replace the O‑ring, tighten to the factory torque, and dispose of oil and the old element responsibly. If unsure, a qualified workshop will handle it quickly and correctly.