Parts for your 2016 Honda Cr-v-Pedal pads

2016 Honda CR‑V Pedal Pads

Pedal pads are relevant on the 2016 Honda CR‑V. Technical references including the Honda CR‑V 2015–2016 Service Manual (Brake System – Brake Pedal) and the Honda Electronic Parts Catalogue list a removable rubber brake pedal pad for this model. The accelerator pedal uses an integrated tread (no separate rubber cover), and any manual‑transmission variants also use a rubber clutch pedal pad.

On a 2016 CR‑V, the pedal pads do a simple but critical job: they provide secure, non‑slip contact so the driver’s shoe won’t skate off the pedal in the wet, reduce vibration through the foot, and keep the vehicle compliant with safety standards. The brake pedal pad is a moulded rubber cover that slides over the metal pedal plate. Over time it hardens, smooths off, or cracks, which reduces grip—especially in rainy Kiwi or Aussie conditions.

As part of routine servicing, the brake pedal pad should be inspected annually or about every 20,000 kilometres. If the surface is shiny, the raised ribs are worn flat, the edges are curling, or there are splits, it’s time to replace. Replacement is quick and inexpensive: no special tools, usually a five‑minute job. Best practice is to use a genuine‑spec pad sized for the CR‑V’s pedal plate to ensure a snug fit and consistent feel.

• Replacement tips:
  • Remove the old pad by peeling it off the plate, clean the metal surface of dirt and grit.
  • Warming the new pad in hot water for a minute makes it more pliable.
  • Hook the top lip first, then stretch over the sides and bottom. Ensure the rubber lip fully captures the plate all the way around.
  • Press firmly and check for any looseness, test pedal operation before driving.
• What to avoid:
  • Universal metal “dress‑up” covers that can reduce grip or foul on floor mats.
  • Driving with a smooth, hardened pad—roadworthy inspections may fail it.
• Extra notes:
  • Automatic CR‑V: brake pedal pad only. Manual variants: brake and clutch pads.
  • Keep floor mats clipped in place so they can’t ride up under the pedals.

Swapping a tired pedal pad restores that grippy, confident pedal feel and helps keep the CR‑V safe and compliant for everyday commuting or the odd weekend road trip.

Popular questions

Does the 2016 Honda CR‑V have pedal pads?
Yes. The 2016 CR‑V uses a removable rubber pad on the brake pedal. The accelerator pedal has an integrated plastic tread (no separate pad). Any manual‑transmission variants also use a rubber clutch pedal pad.

How often should the brake pedal pad be replaced?
There’s no fixed time limit—replace it when it shows wear. Have it checked during regular servicing (about every 20,000 kilometres or annually). If the pad feels slippery, looks shiny, or is cracked or curling, fit a new one.

Can a CR‑V owner replace the pedal pad at home?
Absolutely. It’s a simple push‑on job that takes a few minutes. Use a correct‑fit pad for the 2016 CR‑V, make sure it’s seated all the way around the plate, and test the pedal before driving.