Your Selected Vehicle
Parts for your 2016 Honda Accord-Wiper blades
Repco Hybrid Beam Wiper Blade Multi-Fit 650mm (26 inch) - RHB26-S
Fitment Notes:
Explore 4WD & Adventure
Maintaining and Replacing the Wiper Blades on Your 2016 Honda Accord
The importance of wiper blades is often overlooked, yet they play a critical role in keeping your windscreen clean and maintaining clear visibility in inclement weather. When it comes to your 2016 Honda Accord, ensuring your wiper blades are in top-notch condition should be a regular part of your vehicle maintenance routine.
The wiper blades on your 2016 Honda Accord are designed to meet specific performance standards, ensuring optimal contact with the windscreen for a streak-free wipe. However, like any other part of your vehicle, they are subject to wear and tear over time. Recognising the signs of deterioration is key to maintaining the effectiveness of your wipers.
One of the most obvious signs that your wiper blades need replacing is streaking on the windscreen. If your present wipers leave lines of water, chances are the rubber blades are either damaged or have become too rigid due to exposure to the elements. Chattering or skipping sounds while the wipers are in motion can also indicate that they are not making proper contact with the windscreen, pointing to a need for replacement. Splits or visible damage to the rubber edge or a loose fit in the wiper frame further signal that it's time for new blades.
- Inspect regularly: Make it a habit to check your wiper blades for signs of wear every few months. Take a close look at the rubber to ensure it's smooth and free from cracks or jagged edges.
- Clean periodically: Dirt and debris can cause the blades to wear out faster. Use a clean cloth dampened with washer fluid to wipe away any build-up on the blade edges. This should be done whenever you fill up on fuel.
- Avoid using when dry: Operating your wipers on a dry windscreen can cause unnecessary friction, leading to premature wear. Instead, ensure the glass is wet before activating them.
When it comes time to replace your wiper blades, pay attention to the size requirements for your 2016 Honda Accord. The correct size ensures that they fit properly and cover the maximum area of your windscreen. Your owner's manual will typically provide guidance on the appropriate sizes for both the driver and passenger sides. However, if you're unsure, most auto parts stores have a guide or knowledgeable staff to assist you in finding the right size.
Replacing wiper blades is a straightforward process. Start by lifting the wiper arm away from the windscreen until it stands on its own. Locate the tab or button on the underside of the wiper arm where it connects to the blade. Press the tab and carefully slide the old wiper blade off the arm. With the new blade, align it with the wiper arm and gently slide it into place, ensuring it clicks securely. Gently return the wiper arm to the windscreen and repeat this process for the other side.
If you are not comfortable replacing the wiper blades yourself, many service centres offer to perform this task quickly, often at minimal cost. Regular replacement, typically every six months to a year depending on usage and exposure to the elements, is recommended to ensure optimal performance.
Proactive care of your wiper blades not only maximises their lifespan but also ensures your safety on the road by maintaining clear visibility in rainy or snowy conditions. As you include wiper blade maintenance in your routine vehicle care, you can drive your 2016 Honda Accord confidently, no matter the weather.