Parts for your 2016 Ford Ranger-Pedal pads

2016 Ford Ranger pedal pads — what they do and when to swap them out

Based on Ford’s workshop information for the PX MkII Ranger (2015–2018) and common Ford parts catalogues for this model, pedal pads are indeed fitted to the 2016 Ford Ranger. A removable rubber brake pedal pad is used on all variants, and a removable clutch pedal pad is used on manual models. The accelerator is typically an integrated plastic pedal without a separate rubber pad.

On this Ranger, the pedal pads are simple but important safety items. They provide a grippy, resilient contact surface so boots don’t slip off when braking or working the clutch, especially in the wet. Over time, the rubber can harden, polish smooth, crack, or even tear away, reducing traction and potentially affecting stopping control. Because they’re inexpensive and easy to fit, keeping them in good nick is a no-brainer for safety and for passing a WOF or roadworthy.

When should a 2016 Ford Ranger have its pedal pads replaced?

• Visible wear: smooth, shiny, or flattened tread ribs
• Cracks, splits, or the pad working loose on the pedal plate
• Slippery feel underfoot, especially when wet
• Any sign the steel pedal face is exposed

Servicing tips and replacement advice:

• Inspect at every service or at least every 12 months, more often if the ute sees mud, sand, or farm work.
• Clean pads with mild soap and water, avoid petroleum-based cleaners or silicone dressings that make them slippery.
• If replacing, warm the new pad slightly and use a touch of soapy water to help it slip over the pedal plate. Hook the top lip first, then work around the edges until it seats fully.
• Choose genuine or quality aftermarket pads designed for the PX MkII Ranger to ensure correct fit and tread pattern.

Owners of manual Rangers should check both brake and clutch pads, autos only have the brake pad to service. The accelerator pedal generally doesn’t have a removable pad, so if it’s damaged, the pedal assembly is usually replaced as a unit. Staying on top of these small rubber parts keeps the Ranger safer to drive and compliant for Aussie and Kiwi inspections.

Popular questions about 2016 Ford Ranger pedal pads

Are pedal pads fitted to the 2016 Ford Ranger?
Yes. All 2016 Rangers have a removable rubber brake pedal pad. Manual models also have a removable clutch pedal pad. The accelerator is typically an integrated plastic pedal without a separate pad.

How often should the pedal pads be replaced?
There’s no strict interval, replace when worn, cracked, loose, or slippery. For most utes that see daily work, expect inspection annually and replacement anywhere from 3–7 years depending on use and climate.

Can the pads be replaced at home?
Absolutely. It’s a quick DIY job with no special tools. Clean the pedal, warm the new pad, hook the top edge on and stretch it around. Make sure it’s seated fully so it won’t slip during use.