Parts for your 2015 Volvo Xc60-Gas struts

2015 Volvo XC60 gas struts — what they do and how to look after them

Gas struts are absolutely fitted to the 2015 Volvo XC60. Volvo’s official service platform (VIDA), the Volvo Genuine Parts Catalogue, and mainstream application data from gas-spring manufacturers list gas‑charged lift supports for the XC60’s tailgate (including variants with a power tailgate that pairs an electric drive with a gas spring) and for the bonnet. So yes — gas struts are relevant and used on this model.

On this XC60, gas struts do the heavy lifting quietly and safely. They counterbalance the weight of the tailgate so it opens smoothly and stays put without sagging, and they help the bonnet rise without needing a prop rod. On power tailgate cars, the electric spindle works in tandem with a gas spring to manage speed and load, keeping things controlled and gentle on hinges.

As part of regular servicing, it’s smart to check them. Tell‑tale signs they’re on the way out include a tailgate that won’t stay up, a bonnet that drops, slow or jerky opening, needing a hand to lift, light oil mist on the strut body, or a faint hiss after a short stroke. Cold mornings often expose weak struts sooner.

• Inspection cadence: give them a look every 12 months or 15,000 km — wipe the shafts clean, check for corrosion, leaks, and bent hardware.
• Replacement tips:
  1. Support the tailgate/bonnet with a prop before removal.
  2. Pop the spring-clip at each socket with a small flat screwdriver, don’t lever on the shaft.
  3. Match the new struts to VIN/build (force is stamped in N), replace in pairs on the tailgate to keep lift balanced.
  4. Keep ball studs clean and dry, don’t grease the shaft. Torque any replaced studs to spec.
  5. Never puncture or heat a strut — they’re high pressure, recycle as pressurised parts.
• Power tailgate note: after fitting, perform the tailgate initialisation/calibration procedure (VIDA or the vehicle’s learn sequence) so the motor and gas spring sync correctly.

Quality matters. OE or OE‑equivalent gas springs hold their rated force longer, cope better with temperature swings, and reduce stress on hinges and the power drive. Keeping the shafts clean and replacing at the first sign of droop protects paintwork, glass, and — most importantly — heads and fingers.

Technical references used: Volvo VIDA service information for MY2015 XC60 (bonnet and tailgate lift supports, power tailgate setup), Volvo Genuine Parts Catalogue (lift support listings by VIN), and aftermarket gas‑spring application data for Volvo XC60 2014–2017 confirming fitment and force ratings.

Popular questions

How long do gas struts last on a 2015 Volvo XC60?
Most owners see 5–8 years depending on climate and use. Lots of short trips, beach exposure, or extreme heat/cold can shorten life. If the tailgate sags or the bonnet won’t stay up, they’re due.

Can just one tailgate strut be replaced?
It’s best to replace tailgate struts as a matched pair. Uneven force can twist hinges, confuse the power drive (if fitted), and the weaker side will quickly drag the new one down.

Are power tailgate and manual tailgate struts the same?
Not always. Power tailgate setups often use a specific gas spring force and one electric drive unit. Always order by VIN and follow the calibration routine after installation.