Your Selected Vehicle
Parts for your 2015 Nissan Navara-Exhaust mount
Explore 4WD & Adventure
2015 Nissan Navara exhaust-mount: what it does, why it matters, and when to replace it
Yes, an exhaust-mount is absolutely used on the 2015 Nissan Navara. Technical sources including the Nissan Navara D23/NP300 Service Manual (Exhaust System section) and Nissan’s parts catalogue show multiple rubber hanger/insulator mounts supporting the exhaust and tailpipe assembly along the chassis. Those factory manuals detail removal/installation of the muffler and pipes using these mounts, confirming they’re standard fitment on this model.
On a 2015 Navara, the exhaust-mounts (often called rubber hangers or insulators) suspend the exhaust so it can move slightly without knocking on the body, while isolating vibration and exhaust noise from the cabin. They sit at several points from the front pipe through to the rear muffler/tailpipe, keeping clearances right around heat shields, the rear bumper, and underbody components.
Over time, heat, road grime, towing loads, corrugations, and age can harden or crack the mounts. When they’re tired, the ute may develop a dull thud over bumps, a rattle at idle, or the tailpipe might sit skew-whiff. Left too long, a sagging system can stress joints and flex sections, or let the pipe kiss the chassis or spare wheel.
As part of routine servicing, it’s smart to inspect the mounts at the same time as engine oil and filter—especially if the Navara tows, does beach runs, or sees rough tracks. A quick check pays off:
- Look for tears, deep cracks, or perished rubber, squeeze-test for excessive hardness.
- Confirm the exhaust sits central in cut-outs with even clearance to shields and crossmembers.
- Listen for clunks on start-up or when shifting from Reverse to Drive—common mount clues.
Replacement is straightforward with hand tools. Let the exhaust cool, support it with a jack stand, and spritz the hangers with silicone spray to slip them off the pegs. Fit quality OEM-style rubber mounts, heavy‑duty or polyurethane options can suit frequent towing or off‑road use, but may transmit a touch more vibration. Refit any brackets and torque fasteners to the figures in the Nissan service manual. After installation, check for contact points and go for a short drive, then recheck clearances.
How often? There’s no fixed interval, but many owners find mounts last 5–10 years depending on use. Inspect every service, and replace at the first signs of sagging, cracking, or persistent exhaust knocks. Fresh mounts help the Navara feel tight, quiet, and ready for the next trip.
Popular questions
How often should exhaust-mounts be replaced on a 2015 Navara?
There’s no set kilometre figure. In city/light duty use they often last many years, but heavy towing, corrugations, and heat cycles shorten their life. Inspect at every service and replace at the first sign of cracking, hardening, or exhaust misalignment.
What are the symptoms of a failing exhaust-mount on a Navara D23/NP300?
Common giveaways include a dull knock over bumps, a rattle at idle, or the tailpipe sitting off-centre. You may also feel more vibration in the cabin or hear the exhaust touch a shield or crossmember on start-up or gear changes.
Should I upgrade to polyurethane exhaust-mounts for towing or off‑road?
Poly mounts can resist heat and deformation better, which helps with heavy tow loads or rough tracks. They can be a bit firmer, so some extra vibration is possible. For most daily drivers, quality OEM-style rubber mounts are a great balance.
