Your Selected Vehicle
Parts for your 2015 Honda Cr-v-Headlights
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Lamp With Inbuild Reflectors - 283ARWM
LED Autolamps 12V Interior Strip Light With Touch Sensor Switch With MCU Circuitry - 40410MCU
LED Autolamps 10/30V Amber Emergency Light Bar Clear Lens With Amber LEDs 10 Selectable Flash Patterns - LB1345ACM
LED Autolamps 12/24V LED Stop/Tail/Indicator/Reverse Lamp 200x50x28mm Twin Blister - 200BIRSTME2
Explore 4WD & Adventure
LED Autolamps 12/24V 280 Mini Jumbo Stop/Tail/Indicator/Reverse LED Light Blister Pack - 280ARWM
LED Autolamps 10/30V Amber Emergency Bar Clear Lens With Amber LEDs 19 Selectable Flash Patterns - LB964ACM
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
LED Autolamps 90 Series Green Emergency LED Strobe/Warning Light 12V/24V Surface Mount - 90GM
LED Autolamps 12/24V LED Stop/Tail Lamp With Red Lens Round With Grommet/Plug - 113RMG
LEDAUT - Driving Light/Light Bar Patch Suits Ranger - DLPATCH-RANGER
LED Autolamps Rear combination L/R tail lights with sequential indicator, Chrome, Twin Blister - 355ARWM-2
LED Autolamps 12/24V Amber LED Emergency Lamp With Strobe Permanent Mount - 93AM
LED Autolamps 10/30V Rear Position Marker 2 Red LEDs With 40cm Wire Blister Pack - 58RM
LED Autolamps 355 Series Multi Volt Black Stop/Tail/Indicator/Reverse/Reflector LHS & RHS Twin Blister Pack - 355BARWM-2
LED Autolamps 90 Series Blue Emergency LED Strobe/Warning Light 12V/24V Surface Mount - 90BM
LED Autolamps 12V Sequential Indicator Strip Light 10 Square LEDS Amber Lens Blister Pack - 235ASEQ-2
2015 Honda CR‑V Headlights — Purpose, Care and Replacement
Headlights are absolutely relevant and fitted to the 2015 Honda CR‑V. Technical sources including the 2015 Honda CR‑V Owner’s Manual (bulb specifications and lighting controls), Honda service information, and Australian/New Zealand road standards (ADR 13/00, ADR 46/00, NZ Land Transport lighting requirements) specify that compliant headlamps are mandatory equipment. So yes — this model uses headlights, and they’re essential for safe, legal driving.
On the road, the CR‑V’s headlights do more than tick a box. They provide forward illumination at night and in poor weather, make the vehicle visible to others, and define the beam pattern to suit right‑hand‑drive conditions in Australia and New Zealand without dazzling oncoming traffic. They also integrate with daytime running lights and the indicator system to help other road users judge speed and distance.
Most 2015 CR‑V variants in AU/NZ are equipped with halogen projector low beams and halogen reflector high beams. Common globe types are H11 (low beam, 12V 55W) and HB3/9005 (high beam, 12V 60W), but owners should confirm against the vehicle’s handbook or the under‑bonnet label because trim levels and regional specs can differ.
Good servicing keeps the light output strong and the beam correctly aimed. Practical tips include:
- Inspect at each service or every 10,000 km for dimming, colour shift, cloudy lenses, or moisture inside the housing.
- Replace globes in pairs, halogens naturally dim over time. Avoid touching the glass — use clean gloves.
- Check fuses and the headlight relay if a lamp won’t power up, verify earth connections for corrosion.
- Clean and protect lenses. Light yellowing can often be restored, deep crazing or cracked housings should be replaced.
- Verify aim after any replacement or front‑end work. An incorrect beam can fail a WoF/rego check and reduce night visibility.
For many owners, quality OEM‑equivalent halogen globes balance brightness, lifespan and compliance. If considering LED or HID upgrades, choose components certified to ADR/UNECE standards for the CR‑V’s housing and get the aim professionally set. Keeping the headlights in top nick is a small job that pays off every night, every kilometre.
Popular questions about 2015 Honda CR‑V headlights
What headlight globes fit a 2015 Honda CR‑V in Australia or New Zealand?
Most models use H11 for low beam and HB3/9005 for high beam. Because trims can vary, it’s smart to confirm against the owner’s manual or a parts catalogue by VIN. Matching the correct wattage and cap type keeps the beam pattern legal and the wiring happy.
How often should the CR‑V’s headlight globes be replaced?
Halogen globes slowly dim before they fail. Checking output at every service and replacing in pairs when one blows, or when output noticeably drops, is a safe bet. Many drivers find three to five years typical, depending on night driving and vibration.
Are LED headlight upgrades legal on a 2015 CR‑V?
Drop‑in LED globes in halogen housings may not meet ADR/NZ compliance. If upgrading, use approved assemblies or components certified for the CR‑V’s optics, and have the beam aim set correctly. Non‑compliant lights can fail WoF/rego and dazzle other drivers.