Parts for your 2014 Subaru Forester-Wiper refills

2014 Subaru Forester wiper refills

Based on Subaru technical documentation for the SJ-series (MY2014) Forester—namely the owner’s manual guidance on wiper rubber replacement and the Subaru Genuine Parts catalogue entries for insert-style blades—wiper refills are applicable to this model. The OEM front blade frames are designed to accept slide-in rubber inserts, and dealers typically supply genuine refill inserts by length for the front and rear.

For a 2014 Subaru Forester, wiper refills are a tidy, cost-effective way to keep the windscreen clear without binning the entire blade assembly. The refill is simply the rubber insert that does the actual wiping, when it hardens, splits, or leaves streaks, swapping the insert can restore like-new performance. It’s a smart bit of routine servicing for a Forester that spends its life in Aussie or Kiwi sun, salt air, and sudden downpours.

Typical fitment for this model is a longer driver’s side and a shorter passenger’s side up front, with a compact rear window wiper. Many owners go with genuine Subaru inserts to match the factory blade frames, though quality aftermarket refill rubber is also available. If the vehicle has had its blades changed to modern beam-style assemblies, note that some beam blades don’t accept refills—those are replaced as complete units. Sticking with the OEM-style framed blades keeps the refill option open.

As a rule of thumb, refills should be renewed every 6–12 months, or at the first sign of streaking, judder, or missed patches—UV exposure and summer heat accelerate wear across Australia and New Zealand. During a service, a tech will usually check the wipe pattern, inspect the rubber edge for nicks, and run a quick clean of both the refills and the windscreen. A quick DIY clean every month with a microfibre cloth and a mild glass-friendly cleaner helps the refills last longer.

Replacement is straightforward: gently lift the arm, slide the old insert out (retaining the metal rails if fitted), lube the new rubber lightly with a bit of washer fluid or soapy water, and slide it in until the locking tab seats. Always lower the arm carefully onto the glass. For best results, pair fresh refills with a clean windscreen and quality washer fluid—clear vision under the bonnet badge is the whole point.

• Replace when streaking, chattering, or hazing appears.
• Clean refills and windscreen monthly to slow wear.
• Confirm blade style, some aftermarket beam blades don’t accept refills.

Popular questions

What size wiper refills fit a 2014 Subaru Forester?
This Forester typically uses a longer driver’s side and a shorter passenger’s side up front, with a compact rear refill. Exact lengths can vary by market and blade style, so it’s best to check the owner’s manual or measure the existing blades before buying. If the car still has OEM-style framed blades, genuine Subaru inserts by length are a safe bet.

How often should the refills be replaced?
In Australian and New Zealand conditions, plan on every 6–12 months. Heat, UV, coastal air, and dust shorten lifespan. If there’s streaking, squeaking, or the rubber edge looks nicked, don’t wait—fresh refills are cheap insurance for clear vision.

Can aftermarket beam blades be used instead of refills?
Yes, many owners switch to beam blades for simplicity and all-weather performance. Just note that most beam blades don’t accept separate refills, you replace the entire blade next time. If the preference is to keep using refills, stick with OEM-style framed blades that are designed for insert replacement.