Parts for your 2014 Mitsubishi Lancer-Wiper refills

2014 Mitsubishi Lancer wiper refills

Wiper refills are absolutely relevant for the 2014 Mitsubishi Lancer. The factory front wiper blades on the CJ-series Lancer (2007–2017) are the conventional, refillable type, designed to take slide-in rubber inserts with metal rails. This is backed by Mitsubishi Motors workshop literature (Wiper/Washer section) and the Mitsubishi ASA electronic parts catalogue for CJ Lancer, both of which specify serviceable rubber inserts for the front blades. Major AU/NZ application catalogues from brands like Trico and Bosch also list 6 mm insert refills to suit the Lancer’s OE-style frames.

What do the refills do? They’re the replaceable rubber edge that makes contact with the windscreen, clearing rain, road grime, and bug residue. Swapping refills keeps visibility sharp without binning the whole blade frame—handy, cost-effective, and better for the planet.

Sizes most Lancer owners will see: Driver side 650 mm (26"), passenger side 400 mm (16"). The Sportback variant also runs a rear wiper (about 300 mm), the sedan does not. Insert width is typically 6 mm, and the refill can be trimmed to length. The wiper arm is a standard J-hook, so fitment and testing are straightforward.

How often? In Aussie and Kiwi conditions—UV, salt air, and sudden downpours—plan on 6–12 months. Replace sooner if there’s streaking, squeaking, chattering, or nicks in the edge. A quick monthly clean with washer fluid or mild soapy water on the rubber and a glass clean helps them last longer.

• If the car still has the original-style framed blades: refills slide in, reusing the stainless rails.
• If a previous owner fitted one-piece “beam/aero” blades: these usually don’t accept refills—replace the whole blade instead.

1. Lift the arm, lock the blade, and note the insert’s orientation.
2. Slide the old insert out, transfer or reuse the metal rails if required.
3. Lubricate the new rubber lightly with washer fluid, slide it in until it locks, then trim to length.
4. Gently lower, wash the screen, and test on a wet windscreen.

Technical sources referenced: Mitsubishi Motors CJ Lancer workshop manual (Wiper/Washer section), Mitsubishi ASA EPC for CJ Lancer front blade inserts, and AU/NZ application catalogues from Trico and Bosch listing 6 mm insert refills for 2007–2017 Lancer.

Popular questions

What size wiper refills does a 2014 Lancer need?
Most 2014 Lancers use 650 mm (26") on the driver side and 400 mm (16") on the passenger side, with a 6 mm insert width. The Sportback’s rear is about 300 mm. Always measure what’s on the car—some aftermarket blades differ.

Can silicone refills be used instead of rubber?
Yes, if they match the insert width and frame design. Silicone can last longer and bead water nicely, but quality varies. Stick with reputable brands sized for a 6 mm refill channel.

Why do new refills chatter or streak?
Common causes are a dirty windscreen, wax or silicone residue, a bent blade frame, or incorrect insert size. Clean the glass thoroughly, ensure the rails are seated, and confirm the refill width suits the blade channel.