Parts for your 2014 Mitsubishi Asx-Wiper refills

2014 Mitsubishi ASX wiper refills — what they are and when to change them

Wiper refills are absolutely relevant to the 2014 Mitsubishi ASX. Technical references including the Mitsubishi Motors ASA electronic parts catalogue for ASX/RVR (GA-series), and the 2010–2016 ASX/RVR Service Manual (Group 51A – Wiper/Washer), specify replaceable wiper rubber inserts for the factory front and rear blades. Australian application catalogues from major suppliers like Trico and Bosch also list refill options for the ASX, noting that some aftermarket beam blades may be non-refillable and require full-blade replacement instead.

What do wiper refills do? They’re the rubber inserts that make contact with the windscreen, clearing water and road grime so vision stays crisp in dodgy weather. Swapping the insert rather than the whole blade keeps costs down, reduces waste, and maintains the original blade frame alignment that already suits the ASX’s curved glass.

For most 2014 ASX vehicles, common sizes are around 600 mm (driver), 400 mm (passenger), and 300 mm (rear). Always confirm against the owner’s manual, VIN-based parts lookup, or the markings on the existing blade before buying.

• When to replace: every 6–12 months in Aussie and Kiwi conditions, or sooner if there’s streaking, squeaking, smearing, or chattering.
• Quick care tips: clean the rubber and windscreen with mild soapy water, avoid running the wipers on a dry or dusty screen, keep the washer reservoir topped with proper fluid.

Refill replacement is straightforward if the ASX still has OEM-style refillable blades. Slide out the old insert (retain the thin metal rails if they’re separate), slide in the new refill with rails, ensure the end locks home in the cap, and test. A touch of soapy water helps the rubber glide in. If the car has aftermarket one-piece beam blades that are marked “non-refillable,” replace the complete blade assembly instead.

During a routine service, a quick inspection of the edge of the rubber (looking for nicks, hardening, or a shiny worn lip) is a smart move. Fresh refills mean quieter operation, less glare at night, and safer wet-weather driving—small outlay, big visibility win for any 2014 Mitsubishi ASX.

• Does the 2014 Mitsubishi ASX use wiper refills or full blades?
  From factory, the ASX supports refillable rubber inserts for the front and rear wipers, as noted in Mitsubishi service and parts documentation. If aftermarket non-refillable beam blades have been fitted, you’ll need to replace the entire blade instead.
• How often should wiper refills be changed in Australia or New Zealand?
  Every 6–12 months is typical due to UV, heat, and coastal air. Replace sooner if you notice streaks, noise, or reduced clearing, especially after a hot summer or alpine winter.
• What sizes fit the 2014 ASX?
  Commonly about 600 mm driver, 400 mm passenger, and 300 mm rear. Always confirm against the owner’s manual or parts catalogue for your exact trim and blade style before purchasing.