Parts for your 2014 Mitsubishi Asx-Interior bulbs

2014 Mitsubishi ASX Interior Bulbs (Globes)

Interior bulbs are absolutely fitted to the 2014 Mitsubishi ASX. Technical sources such as the Mitsubishi ASX/RVR/Outlander Sport owner’s manual for this model year, the Mitsubishi electronic parts catalogue, and Australian/NZ globe application guides from brands like Narva and Philips all list factory interior lamps (front map/reading lights, centre room/dome lamp, luggage area lamp, and often visor vanity lamps). These references confirm common globe types including W5W/T10 wedge and 31 mm festoon styles, varying slightly by trim and market.

In the ASX, these interior globes handle the day-to-day jobs that make the cabin friendlier: lighting up the seats when the doors open, providing focused light for reading maps, and brightening the luggage area so the esky or pram isn’t a lucky dip after dark. They also tie into the vehicle’s courtesy fade and door-ajar functions, so the lighting feels seamless and practical.

As part of regular servicing, it’s worth giving the interior lighting a quick once-over. There’s no fixed interval—most owners just replace globes when they fade or fail—but a yearly check (or at each 15,000 km service) keeps things tidy. Signs a globe needs attention include flickering, a yellowish or dim output, or the lens running hot compared with normal. If several lights stop at once, check the interior/room light fuse before blaming all the globes.

Many owners in Australia and New Zealand opt for LED upgrades for a brighter, crisper cabin. That’s fine on the ASX: choose quality CANbus-friendly LEDs to minimise flicker or ghosting, match the colour temperature to taste (warm white looks OE, cool white is brighter), and avoid excessive wattage that could heat the lens. Polarity matters with LEDs—if it doesn’t light, flip it 180°.

• Confirm your globe type (often W5W/T10 for map lights, 31 mm festoon for room and luggage lamps—check your manual or existing globe).
• Switch the light off, use a plastic trim tool to ease the lens down, and handle festoon/halogen globes with clean fingers or gloves.
• Swap the globe, test before refitting the lens, and ensure the three-position switch (Door/On/Off) is set as desired.
• If a new globe doesn’t work, check the fuse labelled ROOM/INTERIOR and the door switches.

Popular questions

What interior bulb types does a 2014 Mitsubishi ASX use?
Most ASX variants use W5W/T10 wedge globes for the front map/reading lamps and 31 mm festoon globes for the centre room and luggage area lamps. Some trims may have visor vanity lamps that are either W5W/T10 or small festoons. Always confirm by checking the owner’s manual, the fitted globe, or your VIN-specific parts listing.

Can the ASX’s interior bulbs be upgraded to LED without issues?
Yes. Quality CANbus-compatible LEDs generally work well in the ASX and give a brighter, cleaner light. If an LED doesn’t illuminate, reverse its orientation. Choose sensible brightness and colour (many prefer warm white around 3000–4000K to keep the OEM look) and avoid bargain LEDs that can flicker or cause afterglow.

Why aren’t my interior lights working after replacing a globe?
Check the three-position switch (Door/On/Off) first. If multiple lamps are out, inspect the interior/room light fuse. Make sure the globe type is correct and seated properly—wedge bases need a firm fit and festoons must be centred in their clips. For LEDs, polarity matters, flip the globe if it doesn’t light.