Parts for your 2014 Honda Accord-Exhaust mount

2014 Honda Accord exhaust-mount — purpose, fitment and easy service tips

Yes, an exhaust-mount is absolutely relevant to the 2014 Honda Accord. Technical sources including the Honda Accord 2013–2017 Service Manual (Exhaust System section) and Honda’s electronic parts catalogue list multiple rubber exhaust hanger insulators (often labelled “exhaust mount,” “hanger rubber,” or “insulator”) positioned at the front pipe, centre/resonator area and rear muffler. Industry databases such as ALLDATA and Mitchell1 also diagram these mounts on both 2.4L and 3.5L variants. So if there’s a rattle or the muffler’s sitting wonky, the mounts are likely in the mix.

The exhaust-mount’s job is simple but crucial: it holds the exhaust in place while soaking up vibration, allowing the system to move a touch as the engine rocks and as the pipes heat-cycle. That flex keeps stress off the flanges, flex joint and cat, and it stops the muffler whacking the subframe or rear bumper. On the 2014 Accord, mounts are spaced to keep the system aligned and to keep NVH low in the cabin—no droning, no knocking, no dramas.

As part of servicing of your 2014-honda-accord exhaust-mount, a quick visual check goes a long way. Rubber perishes with age, heat and road grime. If the hangers are cracked, glossy/hardened, elongated, or the exhaust sags, it’s time. Spritzing the pegs with a rubber-safe lubricant (silicone-based) helps inspection and removal, steer clear of petroleum products that can attack the rubber. When one mount fails, the rest are usually close behind—replacing them as a set often restores correct height and alignment.

• Replace if there’s clunking over bumps, rattles on start-up, or the tailpipe sits off-centre.
• Inspect at every service or ~20,000 km, sooner in hot or coastal climates.
• Use OEM or equivalent-quality mounts with the right durometer to keep NVH in check.

After fitting new mounts, ensure the muffler has clean clearance around the subframe, heat shields and bumper. If bracket bolts were disturbed, torque them to the values in the Honda service manual. Sedans and coupes, and 4‑cyl vs V6, can have different bracketry and mount counts, so confirming by VIN against the Honda parts catalogue keeps everything spot-on.

Popular questions about 2014 Honda Accord exhaust-mount

How many exhaust mounts does a 2014 Honda Accord have?
Most 2014 Accords run three to five rubber mounts depending on body style and engine. Expect one near the front/centre and a couple at the rear muffler. The exact count and bracket shapes vary, so checking by VIN against the Honda EPC is the tidy way to be sure.

How long do the exhaust mounts last?
Typically 5–10 years, but climate, heat and road spray speed things up. If there’s visible cracking, elongation, or the exhaust is knocking, don’t wait—fresh mounts are a quick win for ride comfort and system health.

Can universal exhaust mounts be used?
They can in a pinch, but choosing mounts with the correct dimensions and rubber hardness matters. Too soft and you’ll get droop and drone, too hard and you’ll feel more vibration. OEM-spec or high-quality equivalents are the safest bet for the Accord.