Your Selected Vehicle
Parts for your 2014 Holden Barina-Wiper blades
Explore 4WD & Adventure
2014 Holden Barina Wiper Blades
Technical sources confirm wiper blades are fitted and relevant on the 2014 Holden Barina (TM series). The Holden Barina TM Owner’s Manual (MY2014) includes dedicated “Windscreen Wiper/Washer” and, for hatch variants, “Rear Window Wiper/Washer” sections, and Holden/GM Service Information details blade replacement procedures. More broadly, Australian Design Rules require passenger vehicles to be equipped with functional windscreen wipers and washers, underscoring their safety role on the Barina.
On the 2014 Barina, wiper blades are there to keep the windscreen clear of rain, road grime and washer fluid residue so the driver has a clean view in all weather. Hatch models typically add a rear wiper to keep the back glass tidy in wet and dusty conditions, while sedans usually miss out on a rear blade. It’s a simple bit of kit, but critical for safety and compliance.
As part of regular servicing, Barina owners benefit from checking blade condition every few months and replacing them about every 6–12 months, depending on climate and use. Hot sun, salty air, and regular carpark life can harden the rubber and reduce performance. Signs it’s time for new blades include:
- Streaking or hazy patches that won’t go away after a couple of wipes
- Chattering, squeaking, or skipping across the glass
- Cracked, split, or jagged rubber edges
- Missed sections, especially at the ends of the swipe
During service, it helps to clean the windscreen and wipe the blade edges with a damp cloth and mild soap. Keeping the washer reservoir topped with proper washer fluid (not just plain water) improves cleaning and helps prevent odours or freezing in colder regions. Avoid running the wipers on a dry screen, and don’t yank frozen blades off the glass—free the edge gently first.
When choosing replacements, match the connector style and lengths to the Barina’s setup—beam or conventional frames both work if they fit correctly. The owner’s manual or a trusted parts lookup will confirm sizes for driver, passenger, and (if hatch) rear positions. A quick check of wiper arm tension and hinge freedom is also worthwhile, a bent arm or weak spring can spoil the best new blades. With the right fit and a little care, the Barina’s wipers will keep visibility sharp in Aussie and Kiwi conditions.
What size wiper blades fit a 2014 Holden Barina?
Sizes can vary by body style and blade design. The safest bet is to use the owner’s manual or a reputable parts finder to confirm the driver, passenger, and (for hatch) rear lengths and connector types. If in doubt, bringing the old blade to the counter helps match it correctly.
How often should wiper blades be replaced on a 2014 Barina?
Most Barina owners replace blades every 6–12 months. In hotter, coastal, or dusty conditions, rubber ages faster, so earlier replacement can make sense. Any streaking, chattering, or splitting is a clear nudge to fit fresh blades sooner.
Does the Barina hatch have a rear wiper, and how is it replaced?
Hatch versions generally have a rear wiper, while the sedan usually doesn’t. Rear blades are model-specific and swap out via a small release tab on the arm—lift gently, press the tab, slide the old blade off, and clip the new one on. Avoid forcing the arm to prevent damage to the glass or hinge.