Your Selected Vehicle
Parts for your 2014 Ford Focus-Tail lights
LED Autolamps 12V 82 Series Stop/Tail/Indicator/Reverse Lamp Black Bracket - 82BARW
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
Fitment Notes:
Narva 9-33 Volt L.E.D Reverse Lamp White with Red L.E.D Tail Ring and Black Base - 94312
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Right Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312R
Fitment Notes:
LED Autolamps Stop/Tail Indicator With 18 Square LEDs Multi Volt Blister - 35ARM
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse With Reflectors And 500mm LP Cable - SO283ARWM2LR12
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Flood Pattern 4 LED Work Light - LEDWORK-C4-FLOOD
Fitment Notes:
Repco Wireless 1.5M Trailer Board With Rear Combination Lights 20 Metre Range - RTBW
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97010-1-D
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97000-1/4
Fitment Notes:
Repco 12-24V LED Rear Combination Lamp Stop/Tail/Ind/Rev 100X275X22mm - RLT275STIR
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable - 97010-1
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse/Reflector 3 Lamp Combination Black Chrome - MAXILAMPC3XRW
Fitment Notes:
LED Autolamps 355 Series Multi Volt Black Stop/Tail/Indicator/Reverse/Reflector LHS & RHS Twin Blister Pack - 355BARWM-2
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Clear Lens Chrome Bracket - 82CARW
Fitment Notes:
LED Autolamps 12/2V Maxilamp LED Stop/Tail/Indicator/Reflector Black Chrome Bolt Mount - MAXILAMPC1XCE
Fitment Notes:
Maintaining and Replacing Tail Lights on Your 2014 Ford Focus
If you're the owner of a 2014 Ford Focus, it's essential to ensure that every aspect of the vehicle, including the tail lights, is in optimal condition. The tail lights play a crucial role in ensuring safety by signalling to other drivers when you're braking or turning. Proper maintenance and timely replacement of the tail lights are vital parts of car ownership that can help prevent accidents and fines.
Let's dive into the aspects of replacement and maintenance for the tail lights on your 2014 Ford Focus, so you can keep them functioning perfectly and maintain your vehicle in top-notch condition.
- Understanding Your Tail Lights
The 2014 Ford Focus comes equipped with a pair of tail lights located on the rear corners of the vehicle. These lights incorporate not only the typical red glow of the tail lights but also include reverse lights, turn signals, and brake lights. Being a bundled component means that a malfunction in any part of the unit can affect the whole assembly. Regular checks ensure your tail lights are functioning well and improving your visibility to those following you.
- Signs It's Time for a Replacement
Over time, the tail lights might show signs of wear and tear. Here are tell-tale signs that it might be time to get those tail lights checked or replaced:
- Visible cracks or damage to the tail light lens, which might let moisture in.
- Dim or completely non-functional lights.
- Flickering or inconsistent performance when in use.
- Warning lights on the dashboard related to lamp failures.
If you notice any of these issues, it's prudent to address them swiftly. Sometimes the malfunction might only need a bulb replacement, but in other cases, the entire assembly might need a swap.
- Steps for Replacing Tail Lights
Replacing the tail lights on your Ford Focus requires a bit of time and the right tools. Here's a general guide to get it done safely:
- Gather necessary tools: Screwdriver set, replacement bulbs or lamp assembly, cloth/gloves for handling bulbs.
- Open the boot of your car and locate the access panel on the side of the lights.
- Carefully remove the panel by loosening any screws or clips that hold it in place.
- Locate the bulb socket or wiring harness, turn counter-clockwise, and gently pull to release.
- Swap the faulty bulb with a new one, ensuring not to touch it with bare fingers to avoid oil residue transfer, which can shorten its lifespan.
- Re-install the socket by reversing the removal steps, making sure everything is securely in place.
- Test the lights to ensure the new installation is functioning correctly.
For whole assembly replacements, it may be wiser to consult a professional to ensure compatibility and secure installation.
- Regular Maintenance Tips
To keep your tail lights in good working condition, regular maintenance is key. Follow these tips for ongoing care:
- Clean the tail light lenses regularly to keep them clear and visible.
- Check the sealing around the lights to ensure no moisture is seeping in, which can cause bulb failure or electrical issues.
- Periodically test all functionalities (tail light, brake light, reverse light, and indicators) to catch any issues early.
- Have your wiring inspected during regular vehicle maintenance to ensure all electrical connections are sound.
Keeping an eye on these elements not only helps ensure your safety on the road but also avoids unexpected failures or legal hassles.
- Choosing Quality Replacements
When selecting new bulbs or assemblies, consider the quality and compatibility of products. OEM parts, while generally more expensive, guarantee a perfect fit and compliance with vehicle specifications. However, aftermarket products can also serve well if vetted for quality and reliability. Checking reviews and ensuring warranties can be a good practice when selecting these parts.
Maintaining the tail lights in your 2014 Ford Focus might seem like a minor detail, but it's essential for vehicle safety and upkeep. Regular checks, prompt replacements, and mindful maintenance practices ensure that your journeys are safe and your vehicle remains compliant with regulations. If in doubt, never hesitate to consult a professional mechanic to assist with your tail light needs.