Your Selected Vehicle
Parts for your 2014 Daihatsu Bego-Tail lights
Repco 12-24V LED Rear Combination Lamp Stop/Tail/Ind/Rev 100X275X22mm - RLT275STIR
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable - 97010-1
Fitment Notes:
LED Autolamps 355 Series Multi Volt Black Stop/Tail/Indicator/Reverse/Reflector LHS & RHS Twin Blister Pack - 355BARWM-2
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Clear Lens Chrome Bracket - 82CARW
Fitment Notes:
LED Autolamps 12/2V Maxilamp LED Stop/Tail/Indicator/Reflector Black Chrome Bolt Mount - MAXILAMPC1XCE
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator With 18 Square LEDs Twin Blister - 135ARM/2
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly With 123 LEDs - 100BARWM
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Diffused Pattern 4 LED Work Light - LEDWORK-C4-DIFFUSE
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse/Reflector Mini Jumbo Twin Blister - 420ARRWM2
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Chrome Bracket Blister Pack - 82CARRW
Fitment Notes:
LED Autolamps RHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284RHS
Fitment Notes:
Stedi C-4 Black Edition Flush Mount 4 LED Work Light Flood Beam - LEDFLUSH-C4-FLOOD
Fitment Notes:
LED Autolamps MultiVolt R.H.S Stop/Tail/Indicator Assembly 128 Round LEDs - 125BARMR
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Assembly 72 LEDs With Black Bracket - 200BARM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Assembly 72 LEDs With Black Bracket 190x100x28mm - 80BARM
Fitment Notes:
Narva 9-33 Volt LED Reverse (White) With Red LED Tail Ring, 155mm Contoured Chrome Cover - 95628
Fitment Notes:
LED Autolamps LHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284LHS
Fitment Notes:
9-33 Volt LED Reverse, Rear Direction Indicator and Stop Lamps with LED Tail Rings - 94365C
Fitment Notes:
LED Autolamps Rear Taillight Harness To Suit MY22 Ranger / MY20 Ram Plug To Bare Wires - PATCH-RAM.UNI
Fitment Notes:
9-33 Volt LED Rear Direction Indicator and Twin Stop Lamps with LED Tail Rings - 94364C
Fitment Notes:
LED Autolamps 385 Series Rear Combination Lamp LHS with 7 core plug - 385ARWMLCSB
Fitment Notes:
Understanding and Caring for the Tail-Lights on the 2014 Daihatsu Bego
The 2014 Daihatsu Bego, like most modern vehicles, comes equipped with tail-lights as a standard safety feature. Tail-lights are absolutely essential when it comes to driving safely, especially in low light conditions or at night. They help other drivers see your vehicle from behind, signalling your presence and your intentions on the road. So, tail-lights are definitely relevant and fitted on the 2014 Daihatsu Bego, playing a critical role in vehicle safety and road legality.
Tail-lights are located at the rear of the vehicle, usually integrated with the brake lights and indicators. When the headlights are switched on, the tail-lights light up, providing visibility and ensuring that the car is noticeable by others. When the driver applies the brakes, the tail-lights get brighter to signal that the car is slowing down or stopping. Without tail-lights, there would be a much greater risk of accidents during nighttime or bad weather conditions.
Since the 2014 Daihatsu Bego is a compact SUV designed for both urban and some off-road use, having fully functioning tail-lights is a must. Australian road rules also make it a legal requirement for all vehicles to have operational tail-lights. This means that during vehicle inspections or registration checks, the tail-lights will be examined, and faulty ones will need replacing.
Maintaining the tail-lights on the Daihatsu Bego is a practical task that helps to avoid roadside hassles and safety hazards. Here are some handy tips on tail-light care and replacement that any Bego owner can easily follow:
- Regular Checks - Make it a habit to check the tail-lights every few weeks, especially before long trips or at the start of the wet season when visibility reduces. Simply turn on the headlights and walk around the vehicle to make sure the tail-lights illuminate evenly without flickering or dimming.
- Clean the Lenses - Dirt, mud, and grime can build up on tail-light lenses, dulling their brightness. Wiping them clean with a soft cloth and some mild detergent keeps them shining bright. This is particularly important for the Daihatsu Bego, which might see dirtier conditions when driven off-road.
- Replace Bulbs Promptly - If a tail-light bulb burns out, it needs replacing immediately. Failure to do so not only compromises safety but could also attract fines. Replacement bulbs for the 2014 Bego are usually straightforward to get from auto parts stores or dealerships. Using the correct bulb type ensures proper brightness and fitment.
- Check Wiring and Sockets - Sometimes the problem isn't the bulb but corroded or loose wiring connections. If tail-lights flicker or don't stay on, inspecting the wiring harness and bulb sockets for corrosion or damage can save a lot of trouble.
- Tail-Light Assembly Care - The plastic covers on the tail-lights can get scratched or cracked. While small scratches can be polished out, cracks usually mean the whole assembly needs replacing to prevent water ingress, which can damage the bulbs and wiring inside.
When it comes to replacement parts, genuine or high-quality aftermarket tail-light assemblies and bulbs are recommended for the Daihatsu Bego. These ensure the right fit and functionality. DIY bulb replacement is a reasonably simple job for most owners, involving just removing a small panel in the boot area or unscrewing the light assembly. However, if unsure, seeking a professional's help is the safest option.
Regular servicing of the Bego typically includes a quick inspection of all lights. Mechanics will check tail-lights as part of overall vehicle lighting checks and advise on any replacements needed. Keeping tail-lights in good working order improves visibility, enhances safety, and keeps the Bego complying with road regulations.
Driving with fully functional tail-lights on the 2014 Daihatsu Bego builds the confidence that other road users can clearly see the vehicle at all times. With simple maintenance and timely bulb replacement, tail-lights should provide years of trouble-free service. It's a small part of the car, but it makes a big difference in keeping the driver and everyone else on the road safe.