Your Selected Vehicle
Parts for your 2014 Daihatsu Bego-Tail lights
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Licence Plate Lamp Blister Pack Containing Left & Right Lamps - 99ARL2
Fitment Notes:
LED Autolamps Stop/Tail/Indicator Diffused Tail Function With Sequential Indicator - 520ARRMB
Fitment Notes:
LED Autolamps 12V 2x Stop/Tail/Indicator Boat Trailer Lamps with Licence Plate Lamp, includes Left & Right Side - 207BARLP2
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator/Licence Plate Lamp with Reflex Reflector - 99ARL
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps 12V Stop/Tail Strip Lamp With 10 Square LEDs Recessed Mount - 235R12
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Diffused Tail Function With Sequential Indicator - 520ARWM-2
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Ind/Rev With Try Me Function Diffused Tail With Sequential Indicator - 385ARRMB
Fitment Notes:
LED Autolamps 12/24V Maxilamp Stop/Tail/Indicator/Reflector Single Lamp - MAXILAMP1XRE
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator Lamp With Reflex Reflector 100x100x25mm - 100BAR
Fitment Notes:
LED Autolamps 12/24V LED Stop/Tail/Indicator Lamp With Reflex Reflector Blister Pack 1 pce - 150ARM
Fitment Notes:
LED Autolamps 12/24V LED Stop/Tail/Indicator/Reverse Lamp 200x50x28mm Twin Blister - 200BIRSTME2
Fitment Notes:
LED Autolamps 12/24V 280 Mini Jumbo Stop/Tail/Indicator Lamp Blister Pack - 280ARRM
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Lamp With Inbuild Reflectors - 283ARWM
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reflector With Licence Plate Lamp - 99ARLM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamps With Reflector Twin Blister - 101BAR2
Fitment Notes:
Narva Model 72 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
LED Autolamps 12V/24V Maxilamp 5 Lamp Combination Stop/Tail/Indicator/Reverse/Reflector - MAXILAMPC5XRW
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator 380 Series Strip Lamps In Double Black Bracket - 380BAR12
Fitment Notes:
Narva Model 72 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
LED Autolamps 174 Series Stop/Tail/Indicator Lamp 12/24V, Surface Mount, 40cm Cable - 174ARMB
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp With Reflex Reflectors Grey Base Blister Pack 1 pce - 100ARM
Fitment Notes:
Hella 12/24V LED Stop/Tail/Indicator/Number Plate Lamp with 6M Lead - 23956MBULK
Fitment Notes:
Understanding and Caring for the Tail-Lights on the 2014 Daihatsu Bego
The 2014 Daihatsu Bego, like most modern vehicles, comes equipped with tail-lights as a standard safety feature. Tail-lights are absolutely essential when it comes to driving safely, especially in low light conditions or at night. They help other drivers see your vehicle from behind, signalling your presence and your intentions on the road. So, tail-lights are definitely relevant and fitted on the 2014 Daihatsu Bego, playing a critical role in vehicle safety and road legality.
Tail-lights are located at the rear of the vehicle, usually integrated with the brake lights and indicators. When the headlights are switched on, the tail-lights light up, providing visibility and ensuring that the car is noticeable by others. When the driver applies the brakes, the tail-lights get brighter to signal that the car is slowing down or stopping. Without tail-lights, there would be a much greater risk of accidents during nighttime or bad weather conditions.
Since the 2014 Daihatsu Bego is a compact SUV designed for both urban and some off-road use, having fully functioning tail-lights is a must. Australian road rules also make it a legal requirement for all vehicles to have operational tail-lights. This means that during vehicle inspections or registration checks, the tail-lights will be examined, and faulty ones will need replacing.
Maintaining the tail-lights on the Daihatsu Bego is a practical task that helps to avoid roadside hassles and safety hazards. Here are some handy tips on tail-light care and replacement that any Bego owner can easily follow:
- Regular Checks - Make it a habit to check the tail-lights every few weeks, especially before long trips or at the start of the wet season when visibility reduces. Simply turn on the headlights and walk around the vehicle to make sure the tail-lights illuminate evenly without flickering or dimming.
- Clean the Lenses - Dirt, mud, and grime can build up on tail-light lenses, dulling their brightness. Wiping them clean with a soft cloth and some mild detergent keeps them shining bright. This is particularly important for the Daihatsu Bego, which might see dirtier conditions when driven off-road.
- Replace Bulbs Promptly - If a tail-light bulb burns out, it needs replacing immediately. Failure to do so not only compromises safety but could also attract fines. Replacement bulbs for the 2014 Bego are usually straightforward to get from auto parts stores or dealerships. Using the correct bulb type ensures proper brightness and fitment.
- Check Wiring and Sockets - Sometimes the problem isn't the bulb but corroded or loose wiring connections. If tail-lights flicker or don't stay on, inspecting the wiring harness and bulb sockets for corrosion or damage can save a lot of trouble.
- Tail-Light Assembly Care - The plastic covers on the tail-lights can get scratched or cracked. While small scratches can be polished out, cracks usually mean the whole assembly needs replacing to prevent water ingress, which can damage the bulbs and wiring inside.
When it comes to replacement parts, genuine or high-quality aftermarket tail-light assemblies and bulbs are recommended for the Daihatsu Bego. These ensure the right fit and functionality. DIY bulb replacement is a reasonably simple job for most owners, involving just removing a small panel in the boot area or unscrewing the light assembly. However, if unsure, seeking a professional's help is the safest option.
Regular servicing of the Bego typically includes a quick inspection of all lights. Mechanics will check tail-lights as part of overall vehicle lighting checks and advise on any replacements needed. Keeping tail-lights in good working order improves visibility, enhances safety, and keeps the Bego complying with road regulations.
Driving with fully functional tail-lights on the 2014 Daihatsu Bego builds the confidence that other road users can clearly see the vehicle at all times. With simple maintenance and timely bulb replacement, tail-lights should provide years of trouble-free service. It's a small part of the car, but it makes a big difference in keeping the driver and everyone else on the road safe.