Skip to content Skip to navigation menu

Your Selected Vehicle

Parts for your 2013 Volkswagen Amarok-Wiper refills

Sort by
Trico 8mmx710mm Metal Backed Twin Rail Refill - TTR71010

Trico 8mmx710mm Metal Backed Twin Rail Refill - TTR71010

$24
Fitment Notes:
See More
Trico Wiper Blades Refill 6mmx610mm Plastic - TRN61020

Trico Wiper Blades Refill 6mmx610mm Plastic - TRN61020

$21
Fitment Notes:
See More

Explore 4WD & Adventure

Showing 1 - 4 of 4 products

Are wiper refills used on the 2013 Volkswagen Amarok?

Short answer: no, not as a factory‑specified service item. For the 2013 Volkswagen Amarok (2H platform), Volkswagen’s own parts catalogue (ETKA) and workshop information (ELSA) list complete wiper blade assemblies as the replaceable parts, not separate rubber refills. The Amarok’s original equipment blades are a flat “beam” or “aero” style where the rubber element is bonded into the blade, and VW’s service guidance is to replace the full blade when performance drops. Major fitment catalogues from Bosch (Aerotwin) and Valeo back this up by offering complete blade sets for the Amarok rather than standalone refills.

Why’s that the go? Beam blades are designed as a matched unit — the rubber, internal spring rails and aerodynamic spoiler all work together. Swapping just the rubber can upset wipe pressure across the screen, cause chatter or streaking, and it’s easy to damage the spine or end caps during a refill swap. That’s why the OEM path is a full blade change.

  • Integrated design: OE beam blades don’t have a conventional refill track to slide an insert into.
  • Performance: correct curvature and even pressure depend on the blade’s internal rails, not just the rubber.
  • Service practice: VW manuals specify blade replacement intervals, not rubber insert servicing.

In Australia and New Zealand, you’ll see some universal refills on shelves, but they’re a compromise. They may not lock into the Amarok’s factory blade or can loosen over time. For tidy, quiet wiping and proper screen contact, replace the complete blade set. Common sizes for many 2013 Amarok utes are 24 inch (driver) and 19 inch (passenger), though it’s smart to confirm by VIN or measuring on the vehicle, as build variations exist.

Tips for owners: if the blades smear, skip or squeak even after cleaning the windscreen, it’s time for new blades. Use quality beam blades matched to the Amarok’s arm fitting, keep the screen clean, and lift the blades off in frost to protect the rubber. That’ll keep visibility sharp when the weather turns.

Popular questions about 2013 Volkswagen Amarok wiper refills

What size wiper blades fit a 2013 Amarok in Australia/NZ?

Most 2013 Amarok models take a 24 inch driver’s blade and a 19 inch passenger’s blade in a beam style. Because there can be build and trim differences, it’s best to double‑check by measuring on the ute or confirming with the VIN before ordering.

Can universal wiper refills be used on the Amarok’s factory blades?

They’re not recommended. The OE beam blades aren’t designed for separate inserts, and universal refills may not seat properly or hold the correct pressure arc. Replacing the complete blade assembly is the manufacturer‑approved approach.

How often should Amarok wiper blades be replaced?

Plan on every 12 months, or sooner if you notice streaking, judder, or frayed edges. Harsh sun, salt air, and road grime in AU/NZ can age the rubber quicker, so regular checks during services are a good habit.