Your Selected Vehicle
Parts for your 2013 Toyota Vitz|yaris-Interior bulbs
Explore 4WD & Adventure
Narva Marine 12V Saturn Dual Colour 75mm LED Interior Lamp with Touch Switch (White/Red) - 87501WRBL
Narva Marine 12V Saturn Dual Colour 130mm LED Interior Lamp with Touch Switch (White/Red) - 87503WRBL
2013 Toyota Vitz/Yaris Interior Bulbs
Based on Toyota’s technical literature for the XP130 series (2011–2013) — including the Toyota Owner’s Manual for Yaris/Vitz and the Toyota Electronic Parts Catalogue — the 2013 Toyota Vitz/Yaris is fitted with interior-bulbs. Factory equipment typically includes a front dome/map lamp, and depending on trim, a luggage/boot lamp, glovebox lamp and vanity mirror lamps. Common bulb formats listed in parts catalogues for this model are a 31 mm festoon for the dome/map light and W5W (T10 wedge) bulbs for the boot and glovebox where fitted. That makes interior-bulbs both relevant and serviceable items on this vehicle.
In day-to-day use, these interior-bulbs handle courtesy lighting, map reading and general visibility around the cabin and boot. They’re small, but they make the car friendlier at night — no fumbling for a seatbelt or digging blindly for gear in the boot. During routine servicing of a 2013-toyota-vitz-yaris, a quick check of the interior-bulbs is smart practice. If the light is slow to come on, flickers, or looks dim and yellow, the bulb may be tired or there could be a contact issue.
Owners often replace like-for-like with OEM-spec incandescent bulbs, or upgrade to LEDs for a crisper look and reduced power draw. LEDs should match the original bulb base (festoon or T10), fit the housing length, and suit the preferred colour temperature — warm white keeps the factory vibe, while cool white looks more modern. Polarity matters on LEDs, so if one doesn’t light, rotate it 180 degrees. If all interior lights stop at once, Toyota service information points to the DOME 7.5 A fuse (under-bonnet fuse box) as a first check.
Simple steps for changing an interior bulb on this model:
- Switch the lamp to OFF and turn ignition off.
- Use a plastic trim tool to gently release the lens, avoid stressing cold plastic.
- Note the bulb type and orientation, then remove it with gloves or a clean cloth.
- Install the replacement (festoon or T10), ensuring secure seating, flip an LED if it doesn’t light.
- Test with the ON and DOOR settings, then refit the lens.
It’s worth avoiding metal screwdrivers near the headliner and trims — the Vitz/Yaris packs curtain airbags, so gentle, localised prying is best. Keeping interior-bulbs fresh helps the cabin feel tidy and practical, and it’s an easy win to pair with regular servicing of a 2013-toyota-vitz-yaris.
Popular questions
What bulb sizes fit the 2013 Toyota Vitz/Yaris interior-bulbs?
For most XP130 cars, the dome/map light uses a 31 mm festoon, while the boot and glovebox (if equipped) use W5W/T10 wedge bulbs. Some trims add vanity mirror lights, commonly T10 as well. Always confirm by checking the existing bulb or the owner’s manual for the exact trim.
Can the 2013 Vitz/Yaris interior-bulbs be upgraded to LEDs?
Yes. LED replacements are popular for brighter, whiter light and lower draw. Choose the correct base (31 mm festoon or T10), ensure the LED length fits the housing, and pick a colour temperature that suits — warm white feels OEM, cool white looks modern. LEDs are polarity-sensitive, if one doesn’t light, rotate it.
Why did all the interior-bulbs stop working at once?
Start with the DOME 7.5 A fuse in the under-bonnet fuse box, then check the lamp switches (ON/DOOR/OFF) and door-ajar switches. If a single lamp is out, the bulb itself or its contacts are likely at fault. If multiple lamps are out, focus on the fuse and shared wiring first.
