Skip to content Skip to navigation menu

Your Selected Vehicle

Brands

Price

Parts for your 2013 Toyota Avensis-Wiper blades

Sort by
Bar's Bugs Windscreen Cleaner 600ml - BB600
MULTI BUY

Bar's Bugs Windscreen Cleaner 600ml - BB600

$8
Fitment Notes:
See More

Explore 4WD & Adventure

Trico Wiper Blades Refill 6mmx610mm Plastic - TRN61020

Trico Wiper Blades Refill 6mmx610mm Plastic - TRN61020

$21
Fitment Notes:
See More
Bosch Rear wiper Blade 350mm (14IN) - H354

Bosch Rear wiper Blade 350mm (14IN) - H354

Confirm Vehicle
$37
Fitment Notes:
See More
Bosch Rear wiper Blade 350mm (14IN) - H352

Bosch Rear wiper Blade 350mm (14IN) - H352

Confirm Vehicle
$33
Fitment Notes:
See More
Repco Wiper Blades Refill Plastic 8mm 710mm Pair - RRPW28S

Repco Wiper Blades Refill Plastic 8mm 710mm Pair - RRPW28S

$19
Fitment Notes:
See More
Showing 1 - 39 of 167 products

2013 Toyota Avensis wiper blades — purpose, care, and when to replace

Technical sources including the Toyota Owner’s Manual for the 2013 Avensis (T27), Toyota parts catalogues, and local roadworthiness requirements in Australia and New Zealand confirm the vehicle is factory‑fitted with windscreen wiper blades. All 2013 Avensis variants have front wiper blades, and Tourer (wagon) models also have a rear wiper. So wiper blades are absolutely relevant to the 2013 Toyota Avensis.

On this model, wiper blades do the unglamourous but vital job of keeping the windscreen clear of rain, spray, mud, bugs, and coastal salt film. Good blades boost visibility, reduce eye strain on long drives, and help the Avensis breeze through rego/WOF checks where working wipers and washers are a must.

For everyday owners in Australia and New Zealand, the hot sun, UV, dust, and salty air can harden and crack rubber faster than you’d expect. That’s why most tech references and service schedules suggest inspecting the blades at every service and replacing them about every 6–12 months, or sooner if there’s streaking, squeaks, judder, split edges, or missed patches. If the Avensis is a Tourer, don’t forget the rear blade — if it’s smearing, it’s due.

  • Clean the windscreen and the wiper rubber regularly with proper washer fluid, avoid plain bore water that can leave mineral spots.
  • Never run the wipers dry on a dusty screen, a quick washer spray protects the rubber and glass.
  • Wipe the blade edges with a damp microfibre and a dash of isopropyl alcohol to remove road film.
  • Replace blades in pairs to keep the sweep even, the Avensis uses different left/right lengths.
  • Check the arm fitting (hook or pinch‑tab) before ordering, and consider beam‑style upgrades for quieter, streak‑free wiping.

When swapping blades, pop the wipers into service position if available, protect the glass with a towel, press the release, slide the old blade out, then click the new one home until it’s firmly locked. Test with the washer to confirm smooth, quiet operation. Because the Avensis uses asymmetric front blade lengths and the Tourer adds a shorter rear, the best bet is to match sizes from the owner’s manual or an Avensis‑specific parts lookup.

Keeping fresh, high‑quality blades on a 2013 Toyota Avensis is cheap insurance for wet‑weather vision and compliance with Aussie and Kiwi roadworthy standards.

Popular questions about 2013 Toyota Avensis wiper blades

What size wiper blades fit a 2013 Toyota Avensis?

The Avensis uses different lengths for the driver and passenger sides, and Tourer models also have a shorter rear blade. Because sizes can vary by trim and arm style, the safest approach is to confirm against the owner’s manual or match what’s currently fitted if it’s known to be correct.

Most quality suppliers list Avensis‑specific kits that include the correct asymmetric pair. Double‑check whether your car uses a hook or pinch‑tab arm so the new blades click straight on.

How often should the wiper blades be replaced in Australia or New Zealand?

Plan on every 6–12 months, or sooner if there’s streaking, chatter, or cracks in the rubber. Coastal UV, dust, and road film in AU/NZ can shorten blade life, so regular inspections at each service help.

If the car lives outdoors or does lots of highway kays, err on the earlier side. Fresh blades also make passing rego/WOF checks easier.

Why are my Avensis wipers juddering or leaving streaks, and how do I fix it?

Judder usually comes from contaminated glass, hardened rubber, or a worn blade edge. Give the windscreen a deep clean and wipe the blade edge with isopropyl alcohol, if that doesn’t sort it, replace the blades.

Also make sure you’re using proper washer fluid, and consider switching to beam‑style blades for more even pressure and quieter operation.

{ "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "What size wiper blades fit a 2013 Toyota Avensis?", "acceptedAnswer": { "@type": "Answer", "text": "The Avensis uses different lengths for the driver and passenger sides, and Tourer models also have a shorter rear blade. Because sizes can vary by trim and arm style, the safest approach is to confirm against the owner’s manual or match what’s currently fitted if it’s known to be correct.\n\nMost quality suppliers list Avensis‑specific kits that include the correct asymmetric pair. Double‑check whether your car uses a hook or pinch‑tab arm so the new blades click straight on." } }, { "@type": "Question", "name": "How often should the wiper blades be replaced in Australia or New Zealand?", "acceptedAnswer": { "@type": "Answer", "text": "Plan on every 6–12 months, or sooner if there’s streaking, chatter, or cracks in the rubber. Coastal UV, dust, and road film in AU/NZ can shorten blade life, so regular inspections at each service help.\n\nIf the car lives outdoors or does lots of highway kays, err on the earlier side. Fresh blades also make passing rego/WOF checks easier." } }, { "@type": "Question", "name": "Why are my Avensis wipers juddering or leaving streaks, and how do I fix it?", "acceptedAnswer": { "@type": "Answer", "text": "Judder usually comes from contaminated glass, hardened rubber, or a worn blade edge. Give the windscreen a deep clean and wipe the blade edge with isopropyl alcohol, if that doesn’t sort it, replace the blades.\n\nAlso make sure you’re using proper washer fluid, and consider switching to beam‑style blades for more even pressure and quieter operation." } } ]}