Parts for your 2013 Subaru Tribeca-Wheel hubs

2013 Subaru Tribeca Wheel Hubs: What They Do and How to Look After Them

Based on technical sources including the 2013 Subaru Tribeca factory service manual (Suspension/Wheel & Tyre > Hub Unit Bearing) and OEM/aftermarket parts catalogues for this model, the Tribeca is fitted with bolt-in wheel hub and bearing assemblies on both front and rear axles. These sealed “hub unit” bearings include wheel studs and an integrated encoder for the ABS, so wheel-hubs are absolutely relevant to this vehicle.

On the Tribeca, the wheel hub assembly does several jobs at once. It centres and secures the wheel and brake rotor, supports vehicle weight through the bearing, and provides a precise path for the wheel to rotate. The integrated encoder ring talks to the ABS/traction system via the wheel speed sensor, helping keep grip and stability in check. Being an AWD Subaru that’s built for family duty and long kilometres, a healthy set of hubs keeps things smooth, quiet, and predictable.

These hub units are sealed and non-serviceable, so there’s no greasing or bearing preload to adjust. Replacement is done on condition. Common warning signs include a speed-related drone or growl, a faint rumble that changes when cornering, light steering vibration, uneven tyre wear, or an ABS light triggered by a failing encoder. During routine servicing, techs should:

• Check for play at 12 and 6 o’clock with the wheel off the ground.
• Spin the wheel to feel for roughness or listen for rumble.
• Inspect the hub face and studs, and verify the wheel speed sensor reads cleanly.

When replacement is due, using quality hub assemblies pays off in quietness and longevity. The axle nut torque on Subarus is high and model-specific