Your Selected Vehicle
Parts for your 2013 Subaru Impreza-Interior bulbs
Explore 4WD & Adventure
Narva Marine 12V Saturn Dual Colour 75mm LED Interior Lamp with Touch Switch (White/Red) - 87501WRBL
Narva Marine 12V Saturn Dual Colour 130mm LED Interior Lamp with Touch Switch (White/Red) - 87503WRBL
2013 Subaru Impreza Interior Bulbs — Purpose, Care and Replacement
Interior bulbs are absolutely fitted to the 2013 Subaru Impreza. Technical sources, including the 2013 Subaru Impreza Owner’s Manual (Lighting – Replacing bulbs) and the Subaru Service Manual for GP/GJ models (Body: Interior Trim & Lighting), specify serviceable interior lamps such as the map lights, centre dome lamp, luggage/boot lamp and vanity mirror lamps. These documents outline bulb styles (wedge and festoon) and basic removal procedures, confirming the item’s relevance for routine servicing.
In this Impreza, interior bulbs do the quiet but important work: they light up the cabin at night, help find gear in the boot, and make switches and the glovebox easier to use. Good interior lighting boosts comfort and safety, especially on dark country roads or wet winter evenings across Australia and New Zealand.
Replacement is straightforward and a handy part of regular ownership. Most lamps are push-in wedge (often T10/W5W) or small festoon types for the dome. Subaru specifies 12 V bulbs, owners should match the original wattage to avoid heat damage to lenses or housings. Many drivers choose LED upgrades for a cleaner white colour and lower current draw — a smart move if they’re CANbus-friendly and matched to the correct size. Note that LEDs are polarity-sensitive, if one doesn’t light, flip it around.
- Before starting, switch the lights off and let hot bulbs cool. Use a plastic trim tool to pop the lens so it isn’t marked.
- Handle glass bulbs with clean hands or gloves, avoid touching LED chips, and reseat the lens securely after testing.
- If a light won’t work, check the lamp switch position (DOOR/ON/OFF), door-ajar sensors, and the interior light fuse in the cabin fuse box.
There’s no strict service interval — replace bulbs when they’re dim, flickering, or dead. During a routine service, it’s worth a quick check: map lights, centre dome, boot light and vanity mirrors. Owners who regularly haul gear at night may prefer brighter LEDs in the boot for better visibility. Always refer to the owner’s manual for the exact bulb specification for each position on the 2013 Impreza and keep spares in the glovebox — they’re inexpensive, and a torch plus a couple of bulbs can save the day.
Popular questions about 2013 Subaru Impreza interior bulbs
What bulb types are used inside the 2013 Impreza?
Most interior points use small wedge (often T10/W5W) or festoon bulbs for the centre dome. The boot/luggage lamp may also be a wedge style. Exact specs can vary by trim, so the owner’s manual and the markings on the original bulb are the safest guides.
Can the interior bulbs be upgraded to LED?
Yes. Choose the correct size, 12 V rated LEDs. Pick CANbus-friendly options to reduce flicker and make sure the colour temperature suits (around 4000–6000 K keeps it clean without being too blue). LEDs are polarity-sensitive, if they don’t light, rotate them 180 degrees.
Why do my interior lights stay on?
Common causes include a door not fully latched, the dome switch set to ON instead of DOOR, the dimmer wheel set to keep lamps on, or a boot lid switch issue. If everything’s shut and settings look right, check the fuse and consider a quick diagnostic at a workshop.
