Your Selected Vehicle
Parts for your 2013 Subaru Forester-Headlights
Narva Battery Master / Isolation Switch Lever Type (Contacts Rated 180A @ 12V) - 61070
Fitment Notes:
Explore 4WD & Adventure
Narva 12/24 Aeromax Amber LED Mini Light Bar Clear Lens Magnetic Mount - 85013AC
Fitment Notes:
Stedi ST1K Series 21.5 inch Yellow Lens E-Mark LED Driving Light Bar - LEDST1K-20-20L-YEL
Fitment Notes:
LED Autolamps 12/24V 280 Mini Jumbo Stop/Tail/Indicator/Reverse LED Light Blister Pack - 280ARWM
Fitment Notes:
LED Autolamps 12/24V Maxilamp Stop/Tail/Indicator/Reflector Single Lamp - MAXILAMP1XRE
Fitment Notes:
OEX 5mm Twin Core Automotive Cable, Red/Black, With Black Sheath - 30m Roll (NZ Ref.155) - ACX0810
Fitment Notes:
VDO Adaptor T Piece Thread ‘A’ 1/8”-27NPTF Thread ‘B’ 1/8”-27NPTF Thread ‘C’ 1/8”-27NPTF - 230.031
Fitment Notes:
OEX 00 B&S Battery Lead, Post to Stud, Length - 460mm, Stud Hole - 12mm - ACX1036
Fitment Notes:
LED Autolamps 12V Indicator Strip Lamp 18 Square LEDs Recessed Mount With 40cm Hardwired - 380A12
Fitment Notes:
OEX 00 B&S Battery Lead, Stud to Stud, Length - 300mm, Stud Hole - 12mm - ACX1078
Fitment Notes:
Headlights on the 2013 Subaru Forester: Purpose, Maintenance, and Replacement Advice
When it comes to the 2013 Subaru Forester, headlights are definitely a fundamental feature of the vehicle. These front-facing lights serve a crucial role in both safety and functionality, illuminating the road ahead during low-light conditions or poor weather. Without headlights, driving after sunset or in foggy or rainy situations would be hazardous and often illegal in many regions, including Australia. So rest assured, the 2013 Forester is fully equipped with headlights designed to meet all standard driving needs.
Headlights on this model play more than just a practical role in lighting the way, they're an integral part of the vehicle's safety system. Properly functioning headlights ensure the driver can see the road clearly and also alert other road users to the presence of the vehicle. Since the Forester is often used in a variety of driving environments - from urban streets to rural roads - clear visibility is vital to avoid accidents and to respond promptly to road hazards.
The original headlights fitted to the 2013 Subaru Forester typically use halogen bulbs, which are the most common type for vehicles of that era. These bulbs are reliable and produce a bright, focussed beam of light suited for night driving and bad weather conditions. Some variants or aftermarket upgrades may have introduced projector-style lights or even HID systems, but the standard setup remains largely halogen-based.
Maintaining the headlights on a 2013 Forester is an important part of ongoing servicing. Over time, the bulbs themselves can dim or burn out, reducing the light output significantly. It's recommended to inspect headlight bulbs regularly, ideally during routine vehicle servicing or every few months, to make sure both driver and passenger side lights are functioning correctly. Flickering or dim bulbs often indicate it is time for a replacement.
Another common maintenance consideration revolves around headlight lenses. The plastic covers protecting the bulbs can become cloudy or yellowed due to exposure to UV rays, road debris, and chemicals from cleaning products. This haze reduces the brightness and effectiveness of the headlights. Fortunately, there are many restoration kits available that can polish the lens and restore clarity without the need for replacement. Regularly cleaning the lenses with appropriate products will keep the headlights shining bright and ensure optimal driving safety.
When it comes to replacing the headlight bulbs on the 2013 Subaru Forester, it's a pretty straightforward job that doesn't always need a mechanic. The owner's manual provides guidance on which type of bulb to use, typically an H11 bulb for the low beam and 9005 for the high beam, though it is important to check the exact specification for your particular model and region. It's wise to replace bulbs in pairs, even if only one has failed, because bulbs tend to weaken over time and installing a new pair ensures even lighting. Plus, it saves the hassle of facing a mid-trip failure on the other side.
For those opting to upgrade their Forester's lighting, aftermarket LED bulbs or HID conversion kits are popular choices. These options offer brighter, whiter light that can improve night visibility noticeably. Keep in mind that making such upgrades may require slight modifications and should be done within legal brightness and colour regulations for Australian roads.
Ensuring proper alignment of the headlights after replacement or when the car has experienced a jolt or minor accident is another key part of maintenance. Misaligned headlights can dazzle oncoming traffic or reduce the driver's view of the road. Many professional service centres or dealerships that handle Subaru vehicles offer beam alignment services to guarantee the headlights work as intended.
On the whole, the headlights are essential for safe operation of the 2013 Subaru Forester, bringing peace of mind to drivers navigating at night or in poor visibility. Regular checks and maintenance not only help avoid roadside breakdowns and fines but also contribute to safer driving conditions for everyone on the road. Whether it's swapping out a burnt bulb, cleaning the lenses, or upgrading to brighter lighting, staying on top of headlight care is a smart move for every Forester owner.