Parts for your 2013 Nissan Serena-Pedal pads

2013 Nissan Serena pedal pads — what they are, and how to look after them

Pedal pads are relevant and fitted on the 2013 Nissan Serena (C26). Technical references: the Nissan Electronic Service Manual for C26 (Brake System/BR and Driver Controls sections) specifies inspection of the brake pedal rubber surface, and the Nissan Electronic Parts Catalogue (EPC), Group 465 (Pedal), lists a replaceable brake pedal rubber pad for C26 models built 2010–2016. Most 2013 Serenas are CVT automatics, so there’s no clutch pad on those, manual variants (rarer) do have a clutch pedal pad. The accelerator is an electronic pedal module and typically doesn’t use a separate rubber pad.

On a 2013 Serena, the brake pedal pad is the grippy rubber face that your shoe contacts. Its job is simple but crucial: deliver sure-footed traction so braking feels consistent in the wet, in jandals, work boots, or anything in between. When that rubber wears smooth, cracks, or hardens, the foot can slip at the worst moment, and the pad can even fall off — not ideal on a school run or weekend mission.

Servicing-wise, it’s a small, inexpensive item that pays its way in safety. During routine services or a WOF check, it’s worth a quick look. If the pattern’s gone shiny, the edges are chewed out, or the pad feels stiff instead of rubbery, it’s time to replace it. The job is typically a push-on, push-off affair — no need to pull the whole pedal box apart.

• Signs it’s due: smooth or glossy surface, visible splits, missing corners, or the pad won’t stay seated.
• Replacement tip: warm the new pad slightly to make it more pliable, then hook the top lip and work it around evenly.
• Cleaning: a damp cloth and mild soap keeps grit at bay, avoid silicone dressings that can make it slippery.
• Intervals: there’s no set kilometre count — it’s condition-based. Heavy city use or wet, sandy environments wear pads faster.

For CVT Serenas, focus on the brake pad only. If you’ve landed a manual import, treat the clutch pad the same way: check, clean, and replace when worn. Keeping that little bit of rubber in top nick makes a surprising difference to pedal feel and day-to-day confidence behind the wheel.

FAQs

Does a 2013 Nissan Serena have a replaceable pedal pad?
Yes — the brake pedal has a replaceable rubber pad on C26 Serena models. The accelerator is an electronic assembly without a separate pad, and CVT models don’t have a clutch pedal.

How often should the brake pedal pad be replaced?
There’s no fixed schedule. Replace it when the tread pattern is worn smooth, it’s cracked or hard, or it won’t stay clipped. Many owners find it lasts years, but high-traffic city driving or wet conditions can speed up wear.

Is a worn brake pedal pad a WOF issue in NZ?
It can be. If the pad is excessively worn, loose, or missing so that safe operation is affected, the vehicle may fail a WOF. It’s a quick, low-cost fix that keeps the inspector — and the driver — happy.