Your Selected Vehicle
Parts for your 2013 Nissan Pathfinder-Headlight bulbs
LED Autolamps Front End Outline Marker White 12/24Vwith 2P plugs 10cm cable - 58WMB2P
LED Autolamps Twin function side indicator with amber/red side marker - 97ARIMB
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
LED Autolamps 12/24V Round Indicator Lamp With Clear Lens 130mm Diameter Recessed Mount - 102ACM
LED Autolamps 10/30V Front Outline Position Marker 4 White LEDs With 40cm Wire - 35WM
Explore 4WD & Adventure
LED Autolamps 12/24V Stop/Tail Lamp With Reflector 14 LEDs Blister Package - 130RMG
LED Autolamps Multi Volt LED Licence Plate Lamp With Chrome Base Twin Blister - 30CLM
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly With 123 LEDs - 100BARWM
LED Autolamps Twin function rear position with supplementary rear indicator - 97RIMB
LED Autolamps Twin Function Stalk Side Indicator With Red/Amber Side Marker LHS Multivolt - 805ARIML
LED Autolamps MultiVolt R.H.S Stop/Tail/Indicator Assembly 128 Round LEDs - 125BARMR
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Chrome Bracket Blister Pack - 82CARRW
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIM
LED Autolamps Twin function front position with supplementary front indicator - 97WIM
LED Autolamps 12/24V LED Stop/Tail/Indicator Light 284x100x27mm Blister Pack - 282ARRM
LED Autolamps RHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284RHS
LED Autolamps Front Marker LED White With Reflector 12-24V Perm Mnt - EU38WMHD
2013 Nissan Pathfinder headlight-bulbs
Headlight-bulbs are absolutely relevant and used on the 2013 Nissan Pathfinder. Nissan’s factory service information for the R52 (Lighting System) and the 2013 Pathfinder owner’s manual specify replaceable headlight bulbs, and major fitment catalogues from brands like Narva, Philips and Osram list suitable options for this model. Most AU/NZ trims run halogen bulbs (commonly H11 low beam and 9005 high beam), though always confirm against the vehicle handbook or the existing lamp label.
On a 2013 Pathfinder, the headlight-bulbs do the heavy lifting for safe night driving and dull, wet winter days. Good bulbs cut through rain and road glare, help others see the vehicle, and keep the SUV compliant with roadworthy standards. As bulbs age, they dim and shift colour, which means slower reaction time and more eye strain on long night drives.
There’s no strict replacement interval, but it’s smart to swap halogens in pairs when one fails or when output noticeably drops. Many drivers refresh them every couple of years if they do heaps of night kilometres. Sticking with ADR-compliant, quality bulbs avoids scatter, glare, and premature failure.
- Check type first: Most 2013 Pathfinders in AU/NZ use halogen H11 (low) and 9005 (high). Some markets may differ, so confirm via the owner’s manual or VIN-specific parts lookup.
- Basic fitment: Turn lights off, let them cool, open the bonnet, unplug the connector, twist out the old bulb, and fit the new one. Don’t touch the glass—use clean gloves.
- Replace in pairs: Keeps beam colour and brightness matched, improving night-time visibility.
- Inspect housings: Look for moisture, cracked caps, or brittle connectors. Sort any water ingress and replace seals to prevent early bulb failure.
- Aim and test: After fitting, check beam pattern on a wall and adjust if needed so you’re not dazzling oncoming traffic.
- Electrical checks: If a new bulb won’t light, check the relevant fuse, connector fit, and earth points.
If your Pathfinder happens to have HID/bi-xenon from a particular trim or market pack, low-beam bulbs are a different spec and run at high voltage—leave those to a qualified auto sparky to avoid damage or a nasty shock.
What bulb sizes fit a 2013 Nissan Pathfinder?
Most AU/NZ vehicles use H11 for low beam and 9005 (HB3) for high beam. Always confirm against the owner’s manual, the stamp on the existing bulb, or a VIN-based parts guide, as some market trims can differ.
Can the bulbs be changed at home?
Yes, halogen replacements are a simple DIY for most owners: switch lights off, let them cool, access from behind the headlamp, unplug, twist out, and refit. Avoid touching the glass and replace in pairs. If you find HID hardware, get a pro to handle it due to high voltage.
How often should headlight-bulbs be replaced?
There’s no fixed schedule. Replace when a bulb fails or light output fades. Many drivers who do regular night trips refresh halogens every 2–3 years to maintain crisp, even lighting.