Parts for your 2013 Lexus Is-Pedal pads

2013 Lexus IS pedal pads — what they are, why they matter, and when to replace

Pedal pads are absolutely relevant on the 2013 Lexus IS. Technical sources including the Lexus/Toyota Electronic Parts Catalog (EPC) for the 2013 IS (GSE20/25, USE20) list a dedicated brake pedal pad, and the Lexus IS Owner’s Manual and Repair Manual specify checking pedal surfaces for wear and grip. On manual-transmission models there’s also a clutch pedal pad. The accelerator is typically a one-piece pedal with an integrated textured face rather than a separate rubber pad.

On this model, the pedal pad’s main job is to give the driver reliable, non-slip grip on the brake (and clutch, where fitted), especially in the wet. The rubber compound also dampens vibration and helps keep pedal feel consistent. Over years of use, the pad can harden, polish, crack, or tear, making the surface slippery and reducing control. That’s why Lexus service information calls for routine inspection and replacement when worn.

For everyday servicing of a 2013 Lexus IS, it’s smart to check pedal pads at each service interval or WOF/reg inspection. If the pad is shiny, glazed, or the ribs are flattened, it’s due. Replacement is quick: the old rubber cover is pulled off the metal pedal plate and the new pad is pressed on, ensuring it’s fully seated around the edges. No special tools are needed, just a good visual and tactile check after fitment to confirm full coverage and grip.

Care-wise, keep it clean with mild soap and water only. Avoid silicone dressings or solvent cleaners—these can make the pad slippery or degrade the rubber. Make sure floor mats are the correct Lexus type, clipped in place and not stacked, to prevent interference with pedal travel—another point stressed in Lexus service and owner documentation.

If the vehicle is a manual, the clutch pedal pad should be treated the same way: inspect for wear and replace when it loses its bite. The accelerator’s integrated face usually isn’t serviced as a separate pad, if damaged, the pedal assembly is typically replaced as a unit per Lexus repair procedures.

• Replace the pad if it’s cracked, torn, shiny, or slippery when wet.
• If shoes squeak or slip on the brake pedal, check pad condition immediately.
• Confirm the new pad fully wraps the pedal plate—no loose corners.

FAQs

Does the 2013 Lexus IS have pedal pads on all pedals?
It has a removable rubber brake pedal pad, and manual models also have a clutch pedal pad. The accelerator is typically a one-piece pedal with a textured face, not a separate rubber pad.

How often should pedal pads be replaced?
There’s no set kilometre interval. Replace when wear is evident—flattened ribs, glazing, cracks, or reduced grip—something a technician can check during regular servicing.

Can aftermarket metal or dress-up pedal covers be used?
They can, but they must fit securely, maintain non-slip grip in the wet, and not foul floor mats. If in doubt, stick with genuine-style rubber pads that meet OEM specs.