Parts for your 2013 Honda Cr-v-Pedal pads

2013 Honda CR‑V Pedal Pads

Yes, pedal pads are used on the 2013 Honda CR‑V. Honda’s factory service information for the 2012–2016 CR‑V range includes routine inspection and replacement of pedal pads on the brake (all models) and the clutch (manual models). The Honda Electronic Parts Catalogue for RM-series CR‑V lists dedicated “Pad, Pedal – Brake” and “Pad, Pedal – Clutch”. The accelerator is typically an integrated pedal with a moulded tread rather than a separate rubber pad. Local roadworthiness guidelines (e.g., NZTA WOF and Australian RWC inspections) also call out secure, non‑slip pedal surfaces, which these pads provide.

On this CR‑V, pedal pads do a simple but critical job: they give the driver a grippy, non‑slip surface, especially in the wet, and they isolate a bit of vibration so every stop feels controlled. They’re the sacrificial wear layer between shoe soles and the metal pedal arm, designed to be replaced when worn instead of letting the pedal face get slick.

As part of regular servicing, it’s smart to check the brake pedal pad at each service or about every 10,000–15,000 km, and the clutch pad on manual variants at the same time. Cleaning with mild soapy water restores bite, avoid silicone dressings or harsh solvents that can make the rubber slippery or brittle. Make sure the pad is fully seated on the pedal plate with no corners lifting.

• Shiny, smooth, or hardened rubber
• Cracks, splits, or missing chunks
• Pad edges lifting or the pad moving underfoot
• Foot slipping in the wet, or a WOF/RWC advisory for pedal condition

Replacement is quick and inexpensive: warm the new pad slightly to make it more pliable, then hook the bottom lip first and work it over the pedal plate until all edges lock into the groove. For manuals, repeat on the clutch. After fitting, press the brake a few times and confirm a firm, consistent feel.

The accelerator pedal on most 2013 CR‑V models uses an integrated face, if its tread is excessively worn or damaged, the usual fix is replacing the pedal assembly. While you’re there, confirm floor mats are clipped down and clear of all pedals—simple housekeeping that prevents interference and keeps the car compliant.

Does the 2013 Honda CR‑V have pedal pads?

It does. Every 2013 CR‑V has a rubber brake pedal pad, and manual versions have a clutch pedal pad as well. The accelerator is typically an integrated pedal without a separate rubber cover.

How often should pedal pads be replaced on a 2013 CR‑V?

There’s no fixed interval—replace them when wear shows. Many drivers see 3–7 years depending on kilometres, footwear, and climate. If the pad is shiny, cracked, or your foot slips when wet, fit a new one.

Can universal pedal covers be used instead of genuine pads?

It’s best to use pads made for the CR‑V. Correct fitment ensures the pad locks to the pedal plate and maintains proper pedal feel and compliance with WOF/RWC requirements.