Your Selected Vehicle
Parts for your 2013 Honda Cr-v-Headlights
Explore 4WD & Adventure
Narva Sealed Rocker Switch On/On DPDT 12/24V Red LED (Contacts Rated 20A @ 12V) - 63166BL
Fitment Notes:
Cole Hersee Toggle Switch Mom On - Off - Mom On - SPDT (Contacts Rated 25A @ 12V) - 55021BL
Fitment Notes:
Narva Heavy Duty Rocker Switch Off/Momentary On SPST (Contacts Rated 20A @ 12V) - 63050BL
Fitment Notes:
Narva 9–33 Volt LED Light Guide Side Marker Lamp (Amber) With Chrome Cover - 92406
Fitment Notes:
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIMCSB
Fitment Notes:
Cole Hersee Rocker Switch On/Off SPST 12V Green Illuminated (Contacts Rated 25A @ 12V) - 58328-11BL
Fitment Notes:
OEX 39mm Dual Wall Heat Shrink Polyolefin with Adhesive Tubing Black 1.2M - ACX1297L
Fitment Notes:
OEX 2 B&S Battery Lead, Post to Stud, Length - 1,370mm, Stud Hole - 10mm - ACX1016
Fitment Notes:
Narva Sealed Rocker Switch Off/Momentary On SPST 12V Amber Illuminated (Contacts Rated 20A @ 12V) - 63126BL
Fitment Notes:
Guide to Replacing and Maintaining Headlights on Your 2013 Honda CR-V
Owning a 2013 Honda CR-V is about enjoying reliable transport with added comfort and an impressive array of features. One crucial maintenance aspect that sometimes gets overlooked is the care of your headlights. Good headlights do more than illuminate the road, they ensure your safety as well as that of others. Whether you need to replace a bulb or just perform regular maintenance, knowing how to handle your CR-V's headlights is essential.
When it comes time to replace a headlight bulb, the process is fairly straightforward. Make sure you have the right bulb size, for a 2013 Honda CR-V, the low beam typically uses an HB4 bulb. To get started, pop the bonnet and locate the headlight housing area behind your front bumper. Ensure your car is switched off and the keys are out of the ignition to avoid any electrical mishaps.
- Identify the Bulb Housing: You'll see a black plastic cover at the back of the headlight assembly. Twist it to remove the cover and expose the bulb socket.
- Remove the Old Bulb: Disconnect the wiring harness from the back of the bulb. Grip the bulb firmly and twist counterclockwise to remove it from the socket.
- Install the New Bulb: Avoid touching the glass part of the new bulb with your fingers, as oils from your skin can shorten its life. Line up the new bulb with the socket, twist it clockwise to lock it into place, and reconnect the wiring harness.
- Secure and Test: Replace the plastic cover by twisting it back on. Finally, turn on the car and switch on the headlights to ensure everything is working correctly.
Regular maintenance of your headlights is just as important as replacing them. Over time, headlight lenses can become foggy or yellowed due to UV exposure and grime. It's worthwhile to periodically clean your headlights with a dedicated cleaner or even a DIY paste of baking soda and water. Applying a UV-resistant sealant afterwards can also keep them looking clear for longer.
Check your headlight alignment periodically to ensure they're pointing in the correct direction. Misaligned headlights can hinder your visibility and annoy oncoming motorists. Adjusting them is usually a matter of turning the alignment screws located on the headlight assembly.
Should your headlights ever develop issues like flickering, it could be a sign of electrical problems. In such cases, consulting a professional mechanic is the way to go.
Incorporating these practices into your regular vehicle maintenance routine will not only extend the life of your headlights but also enhance your safety and driving experience. So go ahead, give your 2013 Honda CR-V the love it deserves with a headlight check-up today.